[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Errata] [Info page]
This is a modified version of the Internet RFC suitable for machine-translating. Original version is available here:
RFC6402
PROPOSED STANDARD
Errata ExistInternet Engineering Task Force (IETF) J. Schaad
Request for Comments: 6402 Soaring Hawk Consulting
Updates: 5272, 5273, 5274 November 2011
Category: Standards Track
ISSN: 2070-1721
Certificate Management over CMS (CMC) Updates
Abstract
This document contains a set of updates to the base syntax for CMC, a Certificate Management protocol using the Cryptographic Message Syntax (CMS). This document updates RFC 5272, RFC 5273, and RFC 5274.
The new items in this document are: new controls for future work in doing server side key generation, definition of a Subject Information Access value to identify CMC servers, and the registration of a port number for TCP/IP for the CMC service to run on.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc6402.
Copyright Notice
Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Schaad Standards Track [Page 1]
RFC 6402 CMC: Updates November 2011
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Requirements Terminology . . . . . . . . . . . . . . . . . 3
1.2. Abbreviations . . . . . . . . . . . . . . . . . . . . . . 3
2. Updates to RFC 5272 - "Certificate Management over CMS
(CMC)" . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1. New Section 1.3 - "Updates Made by RFC 6402" . . . . . . . 3
2.2. Update Section 6 - "Controls" . . . . . . . . . . . . . . 4
2.3. Replace Section 6.3 - "Linking Identity and POP
Information" . . . . . . . . . . . . . . . . . . . . . . . 4
2.4. Replace Section 6.3.3 - "Renewal and Rekey Messages" . . . 5
2.5. New Section 6.20 - "RA Identity Proof Witness Control" . . 5
2.6. New Section 6.21 - "Response Body Control" . . . . . . . . 7
2.7. New Section 7 - "Other Attributes" . . . . . . . . . . . . 8
2.8. New Section 7.1 - "Change Subject Name Attribute" . . . . 8
2.9. New Section 9 - "Certificate Requirements" . . . . . . . . 10
2.10. New Section 9.1 - "Extended Key Usage" . . . . . . . . . . 10
2.11. New Section 9.2 - "Subject Information Access" . . . . . . 11
2.12. Update Section 8 - "Security Considerations" . . . . . . . 11
3. Updates to RFC 5273 - "Certificate Management over CMS
(CMC): Transport Protocols" . . . . . . . . . . . . . . . . . 12
3.1. Update Section 5 - "TCP-Based Protocol" . . . . . . . . . 12
3.2. New Section 6 - "IANA Considerations" . . . . . . . . . . 12
4. Updates to RFC 5274 - "Certificate Management Message over
CMS (CMC): Compliance Requirements" . . . . . . . . . . . . . 13
4.1. Update to Section 4.2 - "Controls" . . . . . . . . . . . . 13
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13
6. Security Considerations . . . . . . . . . . . . . . . . . . . 13
7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7.1. Normative References . . . . . . . . . . . . . . . . . . . 13
7.2. Informative References . . . . . . . . . . . . . . . . . . 14
Appendix A. ASN.1 Modules . . . . . . . . . . . . . . . . . . . . 15
A.1. 1988 ASN.1 Module . . . . . . . . . . . . . . . . . . . . 15 A.2. 2008 ASN.1 Module . . . . . . . . . . . . . . . . . . . . 24
Schaad Standards Track [Page 2]
RFC 6402 CMC: Updates November 2011
1. Introduction
While dealing with the Suite B profile of CMC [RFC6403], a number of deficiencies were noted in the current base CMC specification. This document has a set of updates to [RFC5272], [RFC5273], and [RFC5274] to deal with those issues.
1.1. Requirements Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
1.2. Abbreviations
The following abbreviations are used in this document. Terms are used as defined in Section 2.1 of RFC 5272.
CA - Certification Authority CRL - Certificate Revocation List CRMF - Certificate Request Message Format EE - End-Entity MAC - Message Authentication Code PKI - Public Key Infrastructure RA - Registration Authority
2. Updates to RFC 5272 - "Certificate Management over CMS (CMC)"
2.1. New Section 1.3 - "Updates Made by RFC 6402"
Insert this section before the current Section 1.3.
The following updates were made by RFC 6402.
o Add new controls:
RA Identity Witness allows for an RA to perform identity checking using the identity and shared-secret, and then tell any following servers that the identity check was successfully performed.
Response Body allows for an RA to identify a nested response for
an EE to process.
o Create a new attribute, Change Subject Name, that allows a client to request a change in the subject name and subject alternate name fields in a certificate. o Add Extended Key Usages for CMC to distinguish server types.
Schaad Standards Track [Page 3]
RFC 6402 CMC: Updates November 2011
o Define a new Subject Information Access type to hold locations to contact the CMC server.
o Clarify that the use of a pre-existing certificate is not limited to just renewal and rekey messages and is required for support. This formalizes a requirement for the ability to do renewal and rekey that previously was implicit.
2.2. Update Section 6 - "Controls"
Update Table 1 by adding the following rows:
+--------------------------+-----------+-----------------+---------+
| Identifier Description | OID | ASN.1 Structure | Section |
+--------------------------+-----------+-----------------+---------+
| id-cmc-raIdentityWitness | id-cmc 35 | BodyPartPath | 6.20 |
| | | | |
| id-cmc-responseBody | id-cmc 37 | BodyPartPath | 6.21 |
+--------------------------+-----------+-----------------+---------+
Addition to Table 1: CMC Control Attributes
2.3. Replace Section 6.3 - "Linking Identity and POP Information"
Replace the text of the section with the following text.
In a CMC Full PKI Request, identity proof information about the client is carried in the certificate associated with the signature of the SignedData containing the certification requests, one of the two identity proof controls or the MAC computed for the AuthenticatedData containing the certification requests. Proof-of-possession (POP) information for key pairs, however, is carried separately for each PKCS #10 or CRMF certification request. (For keys capable of generating a digital signature, the POP is provided by the signature on the PKCS #10 or CRMF request. For encryption-only keys, the controls described in Section 6.7 are used.) In order to prevent substitution-style attacks, the protocol must guarantee that the same entity supplied both the POP and proof-of-identity information.
We describe three mechanisms for linking identity and POP information: witness values cryptographically derived from a shared-
secret (Section 6.3.1), shared-secret/subject name matching (Section
6.3.2), and subject name matching to an existing certificate (Section
6.3.3). Clients and servers MUST support the witness value and the
certificate linking techniques. Clients and servers MAY support shared-secret/name matching or MAY support other bilateral techniques of similar strength. The idea behind the first two mechanisms is to force the client to sign some data into each certification request that can be directly associated with the shared-secret; this will defeat attempts to include certification requests from different entities in a single Full PKI Request.
Schaad Standards Track [Page 4]
RFC 6402 CMC: Updates November 2011
2.4. Replace Section 6.3.3 - "Renewal and Rekey Messages"
Make the new section title "Existing Certificate Linking". Replace all text in this section with this text.
Linking between the POP and an identity is easy when an existing certificate is used. The client copies all of the naming information from the existing certificate (subject name and subject alternative name) into the new certification request. The POP on the new public key is then performed by using the new key to sign the identity information (linking the POP to a specific identity). The identity information is then tied to the POP information by signing the entire enrollment request with the private key of the existing certificate.
Existing certificate linking can be used in the following circumstances:
When replacing a certificate by doing a renewal or rekey certification request.
Using an existing certificate to get a new certificate. An example of this would be to get a key establishment certificate after having gotten a signature certificate.
Using a third-party certificate to get a new certificate from a CA. An example of this would be using a certificate and key pair distributed with a device to prove an identity. This requires that the CA have an out-of-band channel to map the identity in the device certificate to the new EE identity.
2.5. New Section 6.20 - "RA Identity Proof Witness Control"
Insert this section.
The RA Identity Proof Witness control allows an RA to indicate to subsequent control processors that all of the identity proof requirements have been met. This permits the identity proof to be performed at a location closer to the end-entity. For example, the identity proof could be done at multiple physical locations, while the CA could operate on a company-wide basis. The RA performs the identity proof, and potentially other tasks that require the secret to be used, while the CA is prevented from knowing the secret. If the identity proof fails, then the RA returns an error to the client denoting that fact.
Schaad Standards Track [Page 5]
RFC 6402 CMC: Updates November 2011
The relevant ASN.1 for the RA Identity Proof Witness control is as follows:
cmc-raIdentityWitness CMC-CONTROL ::=
{ BodyPartPath IDENTIFIED BY id-cmc-raIdentityWitness }
id-cmc-raIdentityWitness OBJECT IDENTIFIER ::= {id-cmc 35}
The above ASN.1 defines the following items:
cmc-raIdentityWitness is a CMC-CONTROL associating the object identifier id-cmc-raIdentityWitness and the type BodyPartPath. This object is omitted from the 1988 module. The object is added to the object set Cmc-Control-Set. The control is permitted to appear only in the control sequence of a PKIData object. It MUST NOT appear in the control sequence of a PKIResponse. The control is permitted to be used only by an RA. The control may appear multiple times in a control sequence with each occurrence pointing to a different object.
id-cmc-raIdentityWitness is the object identifier used to identify
this CMC control.
BodyPartPath is the type structure associated with the control. The
syntax of BodyPartPath is defined in Section 3.2.2. The path contains a sequence of body part identifiers leading to one of the following items:
Identity Proof control if the RA verified the identity proof in
this control.
Identity Proof Version 2 control if the RA verified the identity
proof in this control.
Full PKI Request if the RA performed an out-of-band identity
proof for this request. The request SHOULD NOT contain either Identity Proof control.
Simple PKI Request if the RA performed an out-of-band identity
proof for this request.
The RA Identity Proof Witness control will frequently be associated with a Modify Certification Request control, which changes the name fields in the associated certification requests. This is because the RA knows the actual name to be assigned to the entity requesting the certificate, and the end-entity does not yet have the details of the name. (The association would be set up by the operator at the time the shared-secret was generated by the RA.)
Schaad Standards Track [Page 6]
RFC 6402 CMC: Updates November 2011
When this control is placed in a message, it is RECOMMENDED that the Control Processed control be placed in the body sequence as well. Using the explicit new control, rather than implicitly relying on the Control Processed control is important due to the need to know explicitly which identity proofs have been performed. The new control also allows an RA to state that out-of-band identity proofs have been performed.
When the identity proof is performed by an RA, the RA also MUST validate the linking between the identity proof and the name information wrapped inside of the key proof-of-possession.
2.6. New Section 6.21 - "Response Body Control"
Insert this section.
The Response Body Control is designed to enable an RA to inform an EE that there is an embedded response message that MUST be processed as part of the processing of this message. This control is designed to be used in a couple of different cases where an RA has done some additional processing for the certification request, e.g., as key generation. When an RA performs key generation on behalf of an EE, the RA MUST respond with both the original response message from the certificate issuer (containing the certificate issuance) as part of the response generated by the RA (containing the new key). Another case where this is useful is when the secret is shared between the RA and the EE (rather than between the CA and the EE) and the RA returns the Publish Trust Anchors control (to populate the correct trust points).
The relevant ASN.1 for the Response Body Control is as follows:
cmc-responseBody CMC-CONTROL ::= {
BodyPartPath IDENTIFIED BY id-cmc-responseBody
}
id-cmc-responseBody OBJECT IDENTIFIER ::= {id-cmc 37} The above ASN.1 defines the following items:
Schaad Standards Track [Page 7]
RFC 6402 CMC: Updates November 2011
cmc-responseBody is a CMC-CONTROL associating the object identifier id-cmc-responseBody with the type BodyPartPath. This object is omitted from the 1988 module. The object is added to the object set Cmc-Control-Set. The control is permitted to appear only in the control sequence of a PKIResponse. The control MUST NOT appear in the control sequence of a PKIData. It is expected that only an intermediary RA will use this control; a CA generally does not need the control as it is creating the original innermost message.
id-cmc-responseBody is the object identifier used to identify this
CMC control.
BodyPartPath is the type structure associated with the control. The
syntax of BodyPartPath is defined in Section 3.2.2. The path contains a sequence of body part identifiers leading to a cmsSequence item which contains a PKIResponse within it.
2.7. New Section 7 - "Other Attributes"
Insert this section before the current Section 7.
There are a number of different locations where various types of attributes can be placed in either a CMC request or a CMC response message. These places include the attribute sequence of a PKCS #10 request, controls in CRMF (Section 6 of [RFC4211]), and the various CMS attribute sequences.
2.8. New Section 7.1 - "Change Subject Name Attribute"
Insert this section.
The Client Name Change Request attribute is designed for a client to ask for a change in its name as part of a certification request. Because of security issues, this cannot be done in the simple way of just changing the requested subject name in the certificate template. The name in the certification request MUST match the name in the certificate used to verify the request, in order that identity and possession proofs are correctly applied. The relevant ASN.1 for the Client Name Change Request attribute is as follows:
Schaad Standards Track [Page 8]
RFC 6402 CMC: Updates November 2011
at-cmc-changeSubjectName ATTRIBUTE ::=
{ ChangeSubjectName IDENTIFIED BY id-cmc-changeSubjectName }
id-cmc-changeSubjectName OBJECT IDENTIFIER ::= {id-cmc 36}
ChangeSubjectName ::= SEQUENCE {
subject Name OPTIONAL,
subjectAlt SubjectAltName OPTIONAL
}
(WITH COMPONENTS {..., subject PRESENT} |
COMPONENTS {..., subjectAlt PRESENT} )
The attribute is designed to be used as an ATTRIBUTE object. As such, the attribute is placed in one of the following two places:
The attributes field in a CertificationRequest.
The controls field of a CertRequest for a CRMF certification request.
The control is identified by the Object Identifier id-cmc-changeSubjectName.
The ASN.1 type associated with control is ChangeSubjectName. The fields of the structure are configured as follows:
subject contains the requested subject name for the new certificate.
subjectAlt contains the requested subject alternative name for the
new certificate.
At least one of the fields in the sequence MUST be present when encoding the structure.
When the CA processes this attribute in a certification request, it will do the following:
1. If present, the subject field is copied to the name field of the template. If the subject field is absent, the name field of the template will be set to a empty sequence.
2. If present, the subjectAlt field is used as the content of a SubjectAltName extension in the certificate. If the subjectAlt field is absent, the subjectAltName extension is removed from the certificate template.
Schaad Standards Track [Page 9]
RFC 6402 CMC: Updates November 2011
2.9. New Section 9 - "Certificate Requirements"
Insert this section before the current Section 8.
Certificates for servers used in the CMC protocol SHOULD conform to the profile defined in [RFC5280]. This document defines some
additional items that MAY appear in CMC server certificates. Section
9.1 defines some additional values for the Extended Key Usage
extension. Section 9.2 defines a new Subject Information Access value that allows for a CMC certificate to publish information on how to contact the services it provides.
2.10. New Section 9.1 - "Extended Key Usage"
Insert this section.
The Extended Key Usage (EKU) extension is used to restrict the use of a certificate to specific applications. We define three different EKUs in this document. The ASN.1 to define these EKUs is:
id-kp-cmcCA OBJECT IDENTIFIER ::= { id-kp 27 } id-kp-cmcRA OBJECT IDENTIFIER ::= { id-kp 28 } id-kp-cmcArchive OBJECT IDENTIFIER ::= { id-kp 29 }
The usage description for each of the EKUs is as follows:
CMC Certification Authorities are identified by the id-kp-cmcCA extended key usage. The certificate may be the same as or different than the CA certificate. If a different certificate is used, the certificates containing the id-kp-cmcCA extended key usage SHOULD have the same name as the certificate used for issuing the certificates. (Using a separate key pair for CMC protocol operations and for issuing certificates and CRLs decreases the number of operations for which the private key used to sign certificates and CRLs would be used.)
CMC Registration Authorities are identified by the id-kp-cmcRA
extended key usage. This usage is placed into RA certificates.
CMC Archive Servers are identified by the id-kp-cmcArchive extended
key usage. CMC Archive Servers and the associated protocol are to be defined in a future document.
Schaad Standards Track [Page 10]
RFC 6402 CMC: Updates November 2011
2.11. New Section 9.2 - "Subject Information Access"
Insert this section.
The subject information access extension indicates how to access information and services for the subject of the certificate. We define a new value for use in this extension, to identify the different locations that CMC services will be available. If this value is placed in a certificate, an appropriate extended key usage defined in Section 9.1 MUST be included in the certificate as well.
The id-ad-cmc OID is used when the subject offers certification services using the CMC protocol. If the CMC services are available via HTTP or FTP, accessLocation MUST be a uniformResourceIdentifier. If the CMC services are available via electronic mail, accessLocation MUST be an rfc822Name. If CMC services are available using TCP/IP, the dNSName or iPAddress name forms MUST be used. Since the GeneralName data structure does not permit the inclusion of a port number, in the absence of other external configuration information, the value of 5318 should be used. (The port registration is in Section 3.2.) The semantics of other name forms of accessLocation (when accessMethod is id-ad-cmc) are not defined by this specification.
The ASN.1 type for this extension is GeneralName (see Section 4.2.1.8 of [RFC5280]).
id-ad-cmc OBJECT IDENTIFIER ::= { id-ad 12 }
2.12. Update Section 8 - "Security Considerations"
Add the following paragraphs to the end of Section 8.
A number of controls such as the RA Identity Proof Witness control exist for an RA to either make assertions about or modify a certification request. Any upstream request processor, such as a CA, MUST verify that the RA is fully identified and authorized to make the assertion or modification it is claiming. If it is not identified or authorized, then any request MUST be rejected.
CMC servers, both RAs and CAs, need to perform due diligence in checking the contents of a certification request. At an absolute minimum, all fields should be checked to ensure that the policies of the CA/RA are correctly enforced. While all fields need to be checked, special care should be taken with names, name forms, algorithm choices, and algorithm parameters. 3. Updates to RFC 5273 - "Certificate Management over CMS (CMC): Transport Protocols"
Schaad Standards Track [Page 11]
RFC 6402 CMC: Updates November 2011
3.1. Update Section 5 - "TCP-Based Protocol"
Replace paragraph 3 in Section 5 with the following.
CMC requires a registered port number to send and receive CMC messages over TCP. The title of this IP Protocol number is "pkix-cmc". The value of this TCP port is 5318.
Prior to this update, CMC did not have a registered port number and used an externally configured port from the Private Port range. Client implementations MAY want to continue to allow for this to occur. Servers SHOULD change to use the new port. It is expected that HTTP will continue to be the primary transport method used by CMC installations.
3.2. New Section 6 - "IANA Considerations"
Insert this new section before the current Section 6.
IANA has assigned a TCP port number in the Registered Port Number range for the use of CMC.
Service name: pkix-cmc Port Number: 5318 Transport protocol: TCP Description: PKIX Certificate Management using CMS (CMC) Reference: RFC 6402 Assignee: iesg@ietf.org Contact: chair@ietf.org
Schaad Standards Track [Page 12]
RFC 6402 CMC: Updates November 2011
4. Updates to RFC 5274 - "Certificate Management Message over CMS
(CMC): Compliance Requirements"
4.1. Update to Section 4.2 - "Controls"
Add the following lines to the end of Table 1.
The following table lists the name and level of support required for each control.
+---------------------------+-----+------+-----+
| Control | EE | RA | CA |
+---------------------------+-----+------+-----+
| RA Identity Proof Witness | N/A | MUST | (2) |
| | | | |
| Response Body | (6) | (6) | N/A |
+---------------------------+-----+------+-----+
Addition to Table 1: CMC Control Attributes
The following note should be added.
6. EE's SHOULD implement if designed to work with RAs and MUST implement if intended to be used in environments where RAs are used for identity validation or key generation. RAs SHOULD implement and validate responses for consistency.
5. IANA Considerations
This document contains a new IANA Considerations section to be added to [RFC5273] as part of this update.
6. Security Considerations
No changes are made to the existing security considerations of RFC 5273 and RFC 5274. The security considerations for RFC 5272 have been slightly modified (Section 2.12).
7. References
7.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC5272] Schaad, J. and M. Myers, "Certificate Management over
CMS (CMC)", RFC 5272, June 2008.
Schaad Standards Track [Page 13]
RFC 6402 CMC: Updates November 2011
[RFC5273] Schaad, J. and M. Myers, "Certificate Management over
CMS (CMC): Transport Protocols", RFC 5273, June 2008.
[RFC5274] Schaad, J. and M. Myers, "Certificate Management
Messages over CMS (CMC): Compliance Requirements", RFC 5274, June 2008.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, May 2008.
7.2. Informative References
[CMS] Housley, R., "Cryptographic Message Syntax (CMS)",
STD 70, RFC 5652, September 2009.
[RFC6403] Zieglar, L., Turner, S., and M. Peck, "Suite B Profile
of Certificate Management over CMS", RFC 6403, November 2011.
[RFC4211] Schaad, J., "Internet X.509 Public Key Infrastructure
Certificate Request Message Format (CRMF)", RFC 4211, September 2005.
[RFC5912] Hoffman, P. and J. Schaad, "New ASN.1 Modules for the
Public Key Infrastructure Using X.509 (PKIX)", RFC 5912, June 2010.
Schaad Standards Track [Page 14]
RFC 6402 CMC: Updates November 2011
Appendix A. ASN.1 Modules
A.1. 1988 ASN.1 Module
This section contains the updated ASN.1 module for [RFC5272]. This module replaces the module in Appendix A of that document. Although a 2008 ASN.1 module is provided, this remains the normative module as per the policy of the PKIX working group.
EnrollmentMessageSyntax-2011-v88
{ iso(1) identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-enrollMsgSyntax-2011-88(76) }
DEFINITIONS IMPLICIT TAGS ::= BEGIN
-- EXPORTS All -- -- The types and values defined in this module are exported for use -- in the other ASN.1 modules. Other applications may use them for -- their own purposes.
IMPORTS
-- PKIX Part 1 - Implicit From [RFC5280]
GeneralName, CRLReason, ReasonFlags, GeneralNames FROM PKIX1Implicit88 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-pkix1-implicit(19)}
-- PKIX Part 1 - Explicit From [RFC5280]
AlgorithmIdentifier, Extension, Name, CertificateSerialNumber, id-ad, id-kp FROM PKIX1Explicit88 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-pkix1-explicit(18)}
-- Cryptographic Message Syntax FROM [CMS]
ContentInfo, Attribute, IssuerAndSerialNumber
FROM CryptographicMessageSyntax2004 { iso(1) member-body(2)
us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0) cms-2004(24)}
-- CRMF FROM [RFC4211]
CertReqMsg, PKIPublicationInfo, CertTemplate FROM PKIXCRMF-2005 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-crmf2005(36)};
Schaad Standards Track [Page 15]
RFC 6402 CMC: Updates November 2011
-- Global Types
-- UTF8String ::= [UNIVERSAL 12] IMPLICIT OCTET STRING
-- The content of this type conforms to RFC 3629.
id-pkix OBJECT IDENTIFIER ::= { iso(1) identified-organization(3)
dod(6) internet(1) security(5) mechanisms(5) pkix(7) }
id-cmc OBJECT IDENTIFIER ::= {id-pkix 7} -- CMC controls id-cct OBJECT IDENTIFIER ::= {id-pkix 12} -- CMC content types
-- The following controls have the type OCTET STRING
id-cmc-identityProof OBJECT IDENTIFIER ::= {id-cmc 3} id-cmc-dataReturn OBJECT IDENTIFIER ::= {id-cmc 4} id-cmc-regInfo OBJECT IDENTIFIER ::= {id-cmc 18} id-cmc-responseInfo OBJECT IDENTIFIER ::= {id-cmc 19} id-cmc-queryPending OBJECT IDENTIFIER ::= {id-cmc 21} id-cmc-popLinkRandom OBJECT IDENTIFIER ::= {id-cmc 22} id-cmc-popLinkWitness OBJECT IDENTIFIER ::= {id-cmc 23}
-- The following controls have the type UTF8String
id-cmc-identification OBJECT IDENTIFIER ::= {id-cmc 2}
-- The following controls have the type INTEGER
id-cmc-transactionId OBJECT IDENTIFIER ::= {id-cmc 5}
-- The following controls have the type OCTET STRING
id-cmc-senderNonce OBJECT IDENTIFIER ::= {id-cmc 6} id-cmc-recipientNonce OBJECT IDENTIFIER ::= {id-cmc 7}
-- This is the content type used for a request message -- in the protocol
id-cct-PKIData OBJECT IDENTIFIER ::= { id-cct 2 }
PKIData ::= SEQUENCE { controlSequence SEQUENCE SIZE(0..MAX) OF TaggedAttribute, reqSequence SEQUENCE SIZE(0..MAX) OF TaggedRequest, cmsSequence SEQUENCE SIZE(0..MAX) OF TaggedContentInfo, otherMsgSequence SEQUENCE SIZE(0..MAX) OF OtherMsg
}
bodyIdMax INTEGER ::= 4294967295
BodyPartID ::= INTEGER(0..bodyIdMax)
Schaad Standards Track [Page 16]
RFC 6402 CMC: Updates November 2011
TaggedAttribute ::= SEQUENCE {
bodyPartID BodyPartID, attrType OBJECT IDENTIFIER, attrValues SET OF AttributeValue
}
AttributeValue ::= ANY
TaggedRequest ::= CHOICE { tcr [0] TaggedCertificationRequest, crm [1] CertReqMsg, orm [2] SEQUENCE { bodyPartID BodyPartID, requestMessageType OBJECT IDENTIFIER, requestMessageValue ANY DEFINED BY requestMessageType
}
}
TaggedCertificationRequest ::= SEQUENCE { bodyPartID BodyPartID, certificationRequest CertificationRequest }
CertificationRequest ::= SEQUENCE {
certificationRequestInfo SEQUENCE {
version INTEGER, subject Name, subjectPublicKeyInfo SEQUENCE {
algorithm AlgorithmIdentifier,
subjectPublicKey BIT STRING },
attributes [0] IMPLICIT SET OF Attribute },
signatureAlgorithm AlgorithmIdentifier, signature BIT STRING
}
TaggedContentInfo ::= SEQUENCE {
bodyPartID BodyPartID, contentInfo ContentInfo }
OtherMsg ::= SEQUENCE { bodyPartID BodyPartID, otherMsgType OBJECT IDENTIFIER, otherMsgValue ANY DEFINED BY otherMsgType }
-- This defines the response message in the protocol id-cct-PKIResponse OBJECT IDENTIFIER ::= { id-cct 3 } ResponseBody ::= PKIResponse
Schaad Standards Track [Page 17]
RFC 6402 CMC: Updates November 2011
PKIResponse ::= SEQUENCE { controlSequence SEQUENCE SIZE(0..MAX) OF TaggedAttribute, cmsSequence SEQUENCE SIZE(0..MAX) OF TaggedContentInfo, otherMsgSequence SEQUENCE SIZE(0..MAX) OF OtherMsg
}
-- Used to return status state in a response
id-cmc-statusInfo OBJECT IDENTIFIER ::= {id-cmc 1}
CMCStatusInfo ::= SEQUENCE { cMCStatus CMCStatus, bodyList SEQUENCE SIZE (1..MAX) OF BodyPartID, statusString UTF8String OPTIONAL, otherInfo CHOICE { failInfo CMCFailInfo, pendInfo PendInfo } OPTIONAL }
PendInfo ::= SEQUENCE { pendToken OCTET STRING, pendTime GeneralizedTime }
CMCStatus ::= INTEGER {
success (0),
failed (2),
pending (3),
noSupport (4), confirmRequired (5), popRequired (6), partial (7) } -- Note: -- The spelling of unsupportedExt is corrected in this version. -- In RFC 2797, it was unsuportedExt.
Schaad Standards Track [Page 18]
RFC 6402 CMC: Updates November 2011
CMCFailInfo ::= INTEGER {
badAlg (0),
badMessageCheck (1),
badRequest (2), badTime (3), badCertId (4), unsupportedExt (5), mustArchiveKeys (6), badIdentity (7), popRequired (8), popFailed (9), noKeyReuse (10), internalCAError (11), tryLater (12), authDataFail (13) }
-- Used for RAs to add extensions to certification requests id-cmc-addExtensions OBJECT IDENTIFIER ::= {id-cmc 8}
AddExtensions ::= SEQUENCE {
pkiDataReference BodyPartID,
certReferences SEQUENCE OF BodyPartID,
extensions SEQUENCE OF Extension
}
id-cmc-encryptedPOP OBJECT IDENTIFIER ::= {id-cmc 9} id-cmc-decryptedPOP OBJECT IDENTIFIER ::= {id-cmc 10}
EncryptedPOP ::= SEQUENCE { request TaggedRequest, cms ContentInfo, thePOPAlgID AlgorithmIdentifier, witnessAlgID AlgorithmIdentifier, witness OCTET STRING }
DecryptedPOP ::= SEQUENCE {
bodyPartID BodyPartID,
thePOPAlgID AlgorithmIdentifier,
thePOP OCTET STRING
}
Schaad Standards Track [Page 19]
RFC 6402 CMC: Updates November 2011
id-cmc-lraPOPWitness OBJECT IDENTIFIER ::= {id-cmc 11}
LraPopWitness ::= SEQUENCE { pkiDataBodyid BodyPartID, bodyIds SEQUENCE OF BodyPartID
}
-- id-cmc-getCert OBJECT IDENTIFIER ::= {id-cmc 15}
GetCert ::= SEQUENCE { issuerName GeneralName, serialNumber INTEGER }
id-cmc-getCRL OBJECT IDENTIFIER ::= {id-cmc 16}
GetCRL ::= SEQUENCE {
issuerName Name,
cRLName GeneralName OPTIONAL,
time GeneralizedTime OPTIONAL,
reasons ReasonFlags OPTIONAL }
id-cmc-revokeRequest OBJECT IDENTIFIER ::= {id-cmc 17}
RevokeRequest ::= SEQUENCE {
issuerName Name,
serialNumber INTEGER,
reason CRLReason,
invalidityDate GeneralizedTime OPTIONAL, passphrase OCTET STRING OPTIONAL, comment UTF8String OPTIONAL }
id-cmc-confirmCertAcceptance OBJECT IDENTIFIER ::= {id-cmc 24}
CMCCertId ::= IssuerAndSerialNumber
-- The following is used to request V3 extensions be added to a -- certificate
id-ExtensionReq OBJECT IDENTIFIER ::= {iso(1) member-body(2)
us(840) rsadsi(113549) pkcs(1) pkcs-9(9) 14}
ExtensionReq ::= SEQUENCE SIZE (1..MAX) OF Extension
-- The following exists to allow Diffie-Hellman Certification -- Request Messages to be well-formed
id-alg-noSignature OBJECT IDENTIFIER ::= {id-pkix id-alg(6) 2} NoSignatureValue ::= OCTET STRING
Schaad Standards Track [Page 20]
RFC 6402 CMC: Updates November 2011
-- Unauthenticated attribute to carry removable data. -- This could be used in an update of "CMC Extensions: Server -- Side Key Generation and Key Escrow" (February 2005) and in -- other documents.
id-aa OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840)
rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) id-aa(2)}
id-aa-cmc-unsignedData OBJECT IDENTIFIER ::= {id-aa 34}
CMCUnsignedData ::= SEQUENCE {
bodyPartPath BodyPartPath,
identifier OBJECT IDENTIFIER,
content ANY DEFINED BY identifier
}
-- Replaces CMC Status Info --
id-cmc-statusInfoV2 OBJECT IDENTIFIER ::= {id-cmc 25}
CMCStatusInfoV2 ::= SEQUENCE { cMCStatus CMCStatus, bodyList SEQUENCE SIZE (1..MAX) OF
BodyPartReference,
statusString UTF8String OPTIONAL,
otherInfo CHOICE {
failInfo CMCFailInfo, pendInfo PendInfo, extendedFailInfo SEQUENCE {
failInfoOID OBJECT IDENTIFIER,
failInfoValue AttributeValue
}
} OPTIONAL
}
BodyPartReference ::= CHOICE { bodyPartID BodyPartID, bodyPartPath BodyPartPath }
BodyPartPath ::= SEQUENCE SIZE (1..MAX) OF BodyPartID
-- Allow for distribution of trust anchors --
id-cmc-trustedAnchors OBJECT IDENTIFIER ::= {id-cmc 26} PublishTrustAnchors ::= SEQUENCE { seqNumber INTEGER, hashAlgorithm AlgorithmIdentifier, anchorHashes SEQUENCE OF OCTET STRING }
Schaad Standards Track [Page 21]
RFC 6402 CMC: Updates November 2011
id-cmc-authData OBJECT IDENTIFIER ::= {id-cmc 27}
AuthPublish ::= BodyPartID
-- These two items use BodyPartList id-cmc-batchRequests OBJECT IDENTIFIER ::= {id-cmc 28} id-cmc-batchResponses OBJECT IDENTIFIER ::= {id-cmc 29}
BodyPartList ::= SEQUENCE SIZE (1..MAX) OF BodyPartID
-- id-cmc-publishCert OBJECT IDENTIFIER ::= {id-cmc 30}
CMCPublicationInfo ::= SEQUENCE { hashAlg AlgorithmIdentifier, certHashes SEQUENCE OF OCTET STRING, pubInfo PKIPublicationInfo }
id-cmc-modCertTemplate OBJECT IDENTIFIER ::= {id-cmc 31}
ModCertTemplate ::= SEQUENCE { pkiDataReference BodyPartPath, certReferences BodyPartList, replace BOOLEAN DEFAULT TRUE, certTemplate CertTemplate }
-- Inform follow-on servers that one or more controls have already -- been processed
id-cmc-controlProcessed OBJECT IDENTIFIER ::= {id-cmc 32}
ControlsProcessed ::= SEQUENCE {
bodyList SEQUENCE SIZE(1..MAX) OF BodyPartReference
}
-- Identity Proof control w/ algorithm agility
id-cmc-identityProofV2 OBJECT IDENTIFIER ::= { id-cmc 34 } IdentifyProofV2 ::= SEQUENCE {
Schaad Standards Track [Page 22]
RFC 6402 CMC: Updates November 2011
proofAlgID AlgorithmIdentifier,
macAlgId AlgorithmIdentifier,
witness OCTET STRING
}
id-cmc-popLinkWitnessV2 OBJECT IDENTIFIER ::= { id-cmc 33 } PopLinkWitnessV2 ::= SEQUENCE { keyGenAlgorithm AlgorithmIdentifier, macAlgorithm AlgorithmIdentifier, witness OCTET STRING }
--
id-cmc-raIdentityWitness OBJECT IDENTIFIER ::= {id-cmc 35}
-- -- Allow for an End-Entity to request a change in name. -- This item is added to RegControlSet in CRMF. --
id-cmc-changeSubjectName OBJECT IDENTIFIER ::= {id-cmc 36}
ChangeSubjectName ::= SEQUENCE {
subject Name OPTIONAL,
subjectAlt GeneralNames OPTIONAL
}
-- (WITH COMPONENTS {..., subject PRESENT} | -- WITH COMPONENTS {..., subjectAlt PRESENT} )
-- -- Embedded response from a third party for processing --
id-cmc-responseBody OBJECT IDENTIFIER ::= {id-cmc 37}
-- -- Key purpose identifiers are in the Extended Key Usage extension --
id-kp-cmcCA OBJECT IDENTIFIER ::= { id-kp 27 } id-kp-cmcRA OBJECT IDENTIFIER ::= { id-kp 28 } id-kp-cmcArchive OBJECT IDENTIFIER ::= { id-kp 28 } -- -- Subject Information Access identifier --
Schaad Standards Track [Page 23]
RFC 6402 CMC: Updates November 2011
id-ad-cmc OBJECT IDENTIFIER ::= { id-ad 12 }
END
A.2. 2008 ASN.1 Module
An updated 2008 ASN.1 module has been provided as part of this update. The module contains those changes that were done to update the current ASN.1 standards (done for [RFC5912]) as well as changes made for this document.
EnrollmentMessageSyntax-2011-v08
{iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-enrollMsgSyntax-2011-08(76)} DEFINITIONS IMPLICIT TAGS ::= BEGIN EXPORTS ALL; IMPORTS
AttributeSet{}, Extension{}, EXTENSION, ATTRIBUTE FROM PKIX-CommonTypes-2009 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkixCommon-02(57)}
AlgorithmIdentifier{}, DIGEST-ALGORITHM, KEY-WRAP, KEY-DERIVATION,
MAC-ALGORITHM, SIGNATURE-ALGORITHM, PUBLIC-KEY
FROM AlgorithmInformation-2009
{iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-algorithmInformation-02(58)}
CertificateSerialNumber, GeneralName, CRLReason, ReasonFlags,
CertExtensions, GeneralNames
FROM PKIX1Implicit-2009
{iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-implicit-02(59)}
Name, id-pkix, PublicKeyAlgorithms, SignatureAlgorithms, id-ad, id-kp FROM PKIX1Explicit-2009 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-explicit-02(51)} ContentInfo, IssuerAndSerialNumber, CONTENT-TYPE FROM CryptographicMessageSyntax-2010
Schaad Standards Track [Page 24]
RFC 6402 CMC: Updates November 2011
{ iso(1) member-body(2) us(840) rsadsi(113549)
pkcs(1) pkcs-9(9) smime(16) modules(0) id-mod-cms-2009(58) }
CertReqMsg, PKIPublicationInfo, CertTemplate FROM PKIXCRMF-2009 {iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-crmf2005-02(55)}
mda-sha1 FROM PKIXAlgs-2009 { iso(1) identified-organization(3) dod(6) internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-algorithms2008-02(56)}
kda-PBKDF2, maca-hMAC-SHA1 FROM CryptographicMessageSyntaxAlgorithms-2009 { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0) id-mod-cmsalg-2001-02(37) }
mda-sha256 FROM PKIX1-PSS-OAEP-Algorithms-2009
{ iso(1) identified-organization(3) dod(6)
internet(1) security(5) mechanisms(5) pkix(7) id-mod(0) id-mod-pkix1-rsa-pkalgs-02(54) } ;
-- CMS content types defined in this document
CMC-ContentTypes CONTENT-TYPE ::= { ct-PKIData | ct-PKIResponse, ... }
-- Signature Algorithms defined in this document
SignatureAlgs SIGNATURE-ALGORITHM ::= { sa-noSignature }
-- CMS Unsigned Attributes
CMC-UnsignedAtts ATTRIBUTE ::= { aa-cmc-unsignedData }
-- --
id-cmc OBJECT IDENTIFIER ::= {id-pkix 7} -- CMC controls id-cct OBJECT IDENTIFIER ::= {id-pkix 12} -- CMC content types -- This is the content type for a request message in the protocol
Schaad Standards Track [Page 25]
RFC 6402 CMC: Updates November 2011
ct-PKIData CONTENT-TYPE ::=
{ TYPE PKIData IDENTIFIED BY id-cct-PKIData }
id-cct-PKIData OBJECT IDENTIFIER ::= { id-cct 2 }
PKIData ::= SEQUENCE { controlSequence SEQUENCE SIZE(0..MAX) OF TaggedAttribute, reqSequence SEQUENCE SIZE(0..MAX) OF TaggedRequest, cmsSequence SEQUENCE SIZE(0..MAX) OF TaggedContentInfo, otherMsgSequence SEQUENCE SIZE(0..MAX) OF OtherMsg }
BodyPartID ::= INTEGER(0..4294967295)
TaggedAttribute ::= SEQUENCE { bodyPartID BodyPartID, attrType CMC-CONTROL.&id({Cmc-Control-Set}), attrValues SET OF CMC-CONTROL.
&Type({Cmc-Control-Set}{@attrType})
}
Cmc-Control-Set CMC-CONTROL ::= {
cmc-identityProof | cmc-dataReturn | cmc-regInfo |
cmc-responseInfo | cmc-queryPending | cmc-popLinkRandom |
cmc-popLinkWitness | cmc-identification | cmc-transactionId |
cmc-senderNonce | cmc-recipientNonce | cmc-statusInfo |
cmc-addExtensions | cmc-encryptedPOP | cmc-decryptedPOP |
cmc-lraPOPWitness | cmc-getCert | cmc-getCRL |
cmc-revokeRequest | cmc-confirmCertAcceptance |
cmc-statusInfoV2 | cmc-trustedAnchors | cmc-authData |
cmc-batchRequests | cmc-batchResponses | cmc-publishCert |
cmc-modCertTemplate | cmc-controlProcessed |
cmc-identityProofV2 | cmc-popLinkWitnessV2, ...,
cmc-raIdentityWitness | cmc-responseBody }
OTHER-REQUEST ::= TYPE-IDENTIFIER
-- We do not define any other requests in this document. -- Examples might be attribute certification requests.
OtherRequests OTHER-REQUEST ::= {...} TaggedRequest ::= CHOICE { tcr [0] TaggedCertificationRequest, crm [1] CertReqMsg, orm [2] SEQUENCE { bodyPartID BodyPartID, requestMessageType OTHER-REQUEST.&id({OtherRequests}), requestMessageValue OTHER-REQUEST.&Type({OtherRequests}
Schaad Standards Track [Page 26]
RFC 6402 CMC: Updates November 2011
{@.requestMessageType})
}
}
TaggedCertificationRequest ::= SEQUENCE { bodyPartID BodyPartID, certificationRequest CertificationRequest }
AttributeList ATTRIBUTE ::= {at-extension-req, ...,
at-cmc-changeSubjectName}
CertificationRequest ::= SEQUENCE {
certificationRequestInfo SEQUENCE {
version INTEGER, subject Name, subjectPublicKeyInfo SEQUENCE {
algorithm AlgorithmIdentifier{PUBLIC-KEY,
{PublicKeyAlgorithms}},
subjectPublicKey BIT STRING
},
attributes [0] IMPLICIT SET OF
AttributeSet{{AttributeList}}
}, signatureAlgorithm AlgorithmIdentifier
{SIGNATURE-ALGORITHM,
{SignatureAlgorithms}},
signature BIT STRING
}
TaggedContentInfo ::= SEQUENCE { bodyPartID BodyPartID, contentInfo ContentInfo }
OTHER-MSG ::= TYPE-IDENTIFIER
-- No other messages currently defined
OtherMsgSet OTHER-MSG ::= {...} OtherMsg ::= SEQUENCE { bodyPartID BodyPartID, otherMsgType OTHER-MSG.&id({OtherMsgSet}), otherMsgValue OTHER-MSG.&Type({OtherMsgSet}{@otherMsgType}) }
Schaad Standards Track [Page 27]
RFC 6402 CMC: Updates November 2011
-- This defines the response message in the protocol
ct-PKIResponse CONTENT-TYPE ::=
{ TYPE PKIResponse IDENTIFIED BY id-cct-PKIResponse }
id-cct-PKIResponse OBJECT IDENTIFIER ::= { id-cct 3 }
ResponseBody ::= PKIResponse
PKIResponse ::= SEQUENCE { controlSequence SEQUENCE SIZE(0..MAX) OF TaggedAttribute, cmsSequence SEQUENCE SIZE(0..MAX) OF TaggedContentInfo, otherMsgSequence SEQUENCE SIZE(0..MAX) OF OtherMsg }
CMC-CONTROL ::= TYPE-IDENTIFIER
-- The following controls have the type OCTET STRING
cmc-identityProof CMC-CONTROL ::=
{ OCTET STRING IDENTIFIED BY id-cmc-identityProof }
id-cmc-identityProof OBJECT IDENTIFIER ::= {id-cmc 3}
cmc-dataReturn CMC-CONTROL ::=
{ OCTET STRING IDENTIFIED BY id-cmc-dataReturn }
id-cmc-dataReturn OBJECT IDENTIFIER ::= {id-cmc 4}
cmc-regInfo CMC-CONTROL ::=
{ OCTET STRING IDENTIFIED BY id-cmc-regInfo }
id-cmc-regInfo OBJECT IDENTIFIER ::= {id-cmc 18}
cmc-responseInfo CMC-CONTROL ::=
{ OCTET STRING IDENTIFIED BY id-cmc-responseInfo }
id-cmc-responseInfo OBJECT IDENTIFIER ::= {id-cmc 19}
cmc-queryPending CMC-CONTROL ::=
{ OCTET STRING IDENTIFIED BY id-cmc-queryPending }
id-cmc-queryPending OBJECT IDENTIFIER ::= {id-cmc 21}
cmc-popLinkRandom CMC-CONTROL ::=
{ OCTET STRING IDENTIFIED BY id-cmc-popLinkRandom }
id-cmc-popLinkRandom OBJECT IDENTIFIER ::= {id-cmc 22} cmc-popLinkWitness CMC-CONTROL ::=
Schaad Standards Track [Page 28]
RFC 6402 CMC: Updates November 2011
{ OCTET STRING IDENTIFIED BY id-cmc-popLinkWitness }
id-cmc-popLinkWitness OBJECT IDENTIFIER ::= {id-cmc 23}
-- The following controls have the type UTF8String
cmc-identification CMC-CONTROL ::=
{ UTF8String IDENTIFIED BY id-cmc-identification }
id-cmc-identification OBJECT IDENTIFIER ::= {id-cmc 2}
-- The following controls have the type INTEGER
cmc-transactionId CMC-CONTROL ::=
{ INTEGER IDENTIFIED BY id-cmc-transactionId }
id-cmc-transactionId OBJECT IDENTIFIER ::= {id-cmc 5}
-- The following controls have the type OCTET STRING
cmc-senderNonce CMC-CONTROL ::=
{ OCTET STRING IDENTIFIED BY id-cmc-senderNonce }
id-cmc-senderNonce OBJECT IDENTIFIER ::= {id-cmc 6}
cmc-recipientNonce CMC-CONTROL ::=
{ OCTET STRING IDENTIFIED BY id-cmc-recipientNonce }
id-cmc-recipientNonce OBJECT IDENTIFIER ::= {id-cmc 7}
-- Used to return status in a response
cmc-statusInfo CMC-CONTROL ::=
{ CMCStatusInfo IDENTIFIED BY id-cmc-statusInfo }
id-cmc-statusInfo OBJECT IDENTIFIER ::= {id-cmc 1}
CMCStatusInfo ::= SEQUENCE { cMCStatus CMCStatus, bodyList SEQUENCE SIZE (1..MAX) OF BodyPartID, statusString UTF8String OPTIONAL, otherInfo CHOICE { failInfo CMCFailInfo, pendInfo PendInfo
} OPTIONAL
}
PendInfo ::= SEQUENCE { pendToken OCTET STRING, pendTime GeneralizedTime } CMCStatus ::= INTEGER {
Schaad Standards Track [Page 29]
RFC 6402 CMC: Updates November 2011
success (0),
failed (2),
pending (3),
noSupport (4), confirmRequired (5), popRequired (6), partial (7)
}
CMCFailInfo ::= INTEGER {
badAlg (0),
badMessageCheck (1),
badRequest (2), badTime (3), badCertId (4), unsuportedExt (5), mustArchiveKeys (6), badIdentity (7), popRequired (8), popFailed (9), noKeyReuse (10), internalCAError (11), tryLater (12), authDataFail (13) }
-- Used for RAs to add extensions to certification requests
cmc-addExtensions CMC-CONTROL ::=
{ AddExtensions IDENTIFIED BY id-cmc-addExtensions }
id-cmc-addExtensions OBJECT IDENTIFIER ::= {id-cmc 8}
AddExtensions ::= SEQUENCE {
pkiDataReference BodyPartID,
certReferences SEQUENCE OF BodyPartID,
extensions SEQUENCE OF Extension{{CertExtensions}}
}
cmc-encryptedPOP CMC-CONTROL ::=
{ EncryptedPOP IDENTIFIED BY id-cmc-encryptedPOP }
cmc-decryptedPOP CMC-CONTROL ::=
{ DecryptedPOP IDENTIFIED BY id-cmc-decryptedPOP }
id-cmc-encryptedPOP OBJECT IDENTIFIER ::= {id-cmc 9} id-cmc-decryptedPOP OBJECT IDENTIFIER ::= {id-cmc 10} EncryptedPOP ::= SEQUENCE { request TaggedRequest, cms ContentInfo, thePOPAlgID AlgorithmIdentifier{MAC-ALGORITHM, {POPAlgs}}, witnessAlgID AlgorithmIdentifier{DIGEST-ALGORITHM,
Schaad Standards Track [Page 30]
RFC 6402 CMC: Updates November 2011
{WitnessAlgs}},
witness OCTET STRING
}
POPAlgs MAC-ALGORITHM ::= {maca-hMAC-SHA1, ...} WitnessAlgs DIGEST-ALGORITHM ::= {mda-sha1, ...}
DecryptedPOP ::= SEQUENCE {
bodyPartID BodyPartID,
thePOPAlgID AlgorithmIdentifier{MAC-ALGORITHM, {POPAlgs}},
thePOP OCTET STRING
}
cmc-lraPOPWitness CMC-CONTROL ::=
{ LraPopWitness IDENTIFIED BY id-cmc-lraPOPWitness }
id-cmc-lraPOPWitness OBJECT IDENTIFIER ::= {id-cmc 11}
LraPopWitness ::= SEQUENCE { pkiDataBodyid BodyPartID, bodyIds SEQUENCE OF BodyPartID }
--
cmc-getCert CMC-CONTROL ::=
{ GetCert IDENTIFIED BY id-cmc-getCert }
id-cmc-getCert OBJECT IDENTIFIER ::= {id-cmc 15}
GetCert ::= SEQUENCE { issuerName GeneralName, serialNumber INTEGER }
cmc-getCRL CMC-CONTROL ::=
{ GetCRL IDENTIFIED BY id-cmc-getCRL }
id-cmc-getCRL OBJECT IDENTIFIER ::= {id-cmc 16}
GetCRL ::= SEQUENCE {
issuerName Name,
cRLName GeneralName OPTIONAL,
time GeneralizedTime OPTIONAL,
reasons ReasonFlags OPTIONAL }
Schaad Standards Track [Page 31]
RFC 6402 CMC: Updates November 2011
cmc-revokeRequest CMC-CONTROL ::=
{ RevokeRequest IDENTIFIED BY id-cmc-revokeRequest}
id-cmc-revokeRequest OBJECT IDENTIFIER ::= {id-cmc 17}
RevokeRequest ::= SEQUENCE {
issuerName Name,
serialNumber INTEGER,
reason CRLReason,
invalidityDate GeneralizedTime OPTIONAL, passphrase OCTET STRING OPTIONAL, comment UTF8String OPTIONAL }
cmc-confirmCertAcceptance CMC-CONTROL ::=
{ CMCCertId IDENTIFIED BY id-cmc-confirmCertAcceptance }
id-cmc-confirmCertAcceptance OBJECT IDENTIFIER ::= {id-cmc 24}
CMCCertId ::= IssuerAndSerialNumber
-- The following is used to request V3 extensions be added -- to a certificate
at-extension-req ATTRIBUTE ::=
{ TYPE ExtensionReq IDENTIFIED BY id-ExtensionReq }
id-ExtensionReq OBJECT IDENTIFIER ::= {iso(1) member-body(2) us(840)
rsadsi(113549) pkcs(1) pkcs-9(9) 14}
ExtensionReq ::= SEQUENCE SIZE (1..MAX) OF
Extension{{CertExtensions}}
-- The following allows Diffie-Hellman Certification Request -- Messages to be well-formed
sa-noSignature SIGNATURE-ALGORITHM ::= { IDENTIFIER id-alg-noSignature VALUE NoSignatureValue PARAMS TYPE NULL ARE required HASHES { mda-sha1 } } id-alg-noSignature OBJECT IDENTIFIER ::= {id-pkix id-alg(6) 2}
NoSignatureValue ::= OCTET STRING
-- Unauthenticated attribute to carry removable data.
id-aa OBJECT IDENTIFIER ::= { iso(1) member-body(2) us(840)
rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) id-aa(2)}
Schaad Standards Track [Page 32]
RFC 6402 CMC: Updates November 2011
aa-cmc-unsignedData ATTRIBUTE ::=
{ TYPE CMCUnsignedData IDENTIFIED BY id-aa-cmc-unsignedData }
id-aa-cmc-unsignedData OBJECT IDENTIFIER ::= {id-aa 34}
CMCUnsignedData ::= SEQUENCE {
bodyPartPath BodyPartPath,
identifier TYPE-IDENTIFIER.&id,
content TYPE-IDENTIFIER.&Type
}
-- Replaces CMC Status Info --
cmc-statusInfoV2 CMC-CONTROL ::=
{ CMCStatusInfoV2 IDENTIFIED BY id-cmc-statusInfoV2 }
id-cmc-statusInfoV2 OBJECT IDENTIFIER ::= {id-cmc 25}
EXTENDED-FAILURE-INFO ::= TYPE-IDENTIFIER
ExtendedFailures EXTENDED-FAILURE-INFO ::= {...}
CMCStatusInfoV2 ::= SEQUENCE { cMCStatus CMCStatus, bodyList SEQUENCE SIZE (1..MAX) OF
BodyPartReference,
statusString UTF8String OPTIONAL,
otherInfo CHOICE {
failInfo CMCFailInfo, pendInfo PendInfo, extendedFailInfo [1] SEQUENCE {
failInfoOID TYPE-IDENTIFIER.&id
({ExtendedFailures}),
failInfoValue TYPE-IDENTIFIER.&Type
({ExtendedFailures}
{@.failInfoOID})
}
} OPTIONAL
}
BodyPartReference ::= CHOICE { bodyPartID BodyPartID, bodyPartPath BodyPartPath }
BodyPartPath ::= SEQUENCE SIZE (1..MAX) OF BodyPartID -- Allow for distribution of trust anchors --
Schaad Standards Track [Page 33]
RFC 6402 CMC: Updates November 2011
cmc-trustedAnchors CMC-CONTROL ::=
{ PublishTrustAnchors IDENTIFIED BY id-cmc-trustedAnchors }
id-cmc-trustedAnchors OBJECT IDENTIFIER ::= {id-cmc 26}
PublishTrustAnchors ::= SEQUENCE { seqNumber INTEGER, hashAlgorithm AlgorithmIdentifier{DIGEST-ALGORITHM,
{HashAlgorithms}},
anchorHashes SEQUENCE OF OCTET STRING
}
HashAlgorithms DIGEST-ALGORITHM ::= {
mda-sha1 | mda-sha256, ...
}
cmc-authData CMC-CONTROL ::=
{ AuthPublish IDENTIFIED BY id-cmc-authData }
id-cmc-authData OBJECT IDENTIFIER ::= {id-cmc 27}
AuthPublish ::= BodyPartID
-- These two items use BodyPartList
cmc-batchRequests CMC-CONTROL ::=
{ BodyPartList IDENTIFIED BY id-cmc-batchRequests }
id-cmc-batchRequests OBJECT IDENTIFIER ::= {id-cmc 28}
cmc-batchResponses CMC-CONTROL ::=
{ BodyPartList IDENTIFIED BY id-cmc-batchResponses }
id-cmc-batchResponses OBJECT IDENTIFIER ::= {id-cmc 29}
BodyPartList ::= SEQUENCE SIZE (1..MAX) OF BodyPartID
cmc-publishCert CMC-CONTROL ::=
{ CMCPublicationInfo IDENTIFIED BY id-cmc-publishCert }
id-cmc-publishCert OBJECT IDENTIFIER ::= {id-cmc 30}
CMCPublicationInfo ::= SEQUENCE {
hashAlg AlgorithmIdentifier{DIGEST-ALGORITHM,
{HashAlgorithms}},
certHashes SEQUENCE OF OCTET STRING, pubInfo PKIPublicationInfo } cmc-modCertTemplate CMC-CONTROL ::=
Schaad Standards Track [Page 34]
RFC 6402 CMC: Updates November 2011
{ ModCertTemplate IDENTIFIED BY id-cmc-modCertTemplate }
id-cmc-modCertTemplate OBJECT IDENTIFIER ::= {id-cmc 31}
ModCertTemplate ::= SEQUENCE { pkiDataReference BodyPartPath, certReferences BodyPartList, replace BOOLEAN DEFAULT TRUE, certTemplate CertTemplate }
-- Inform follow-on servers that one or more controls have -- already been processed
cmc-controlProcessed CMC-CONTROL ::=
{ ControlsProcessed IDENTIFIED BY id-cmc-controlProcessed }
id-cmc-controlProcessed OBJECT IDENTIFIER ::= {id-cmc 32}
ControlsProcessed ::= SEQUENCE {
bodyList SEQUENCE SIZE(1..MAX) OF BodyPartReference
}
-- Identity Proof control w/ algorithm agility
cmc-identityProofV2 CMC-CONTROL ::=
{ IdentityProofV2 IDENTIFIED BY id-cmc-identityProofV2 }
id-cmc-identityProofV2 OBJECT IDENTIFIER ::= { id-cmc 33 }
IdentityProofV2 ::= SEQUENCE {
proofAlgID AlgorithmIdentifier{DIGEST-ALGORITHM,
{WitnessAlgs}},
macAlgId AlgorithmIdentifier{MAC-ALGORITHM, {POPAlgs}},
witness OCTET STRING
}
cmc-popLinkWitnessV2 CMC-CONTROL ::=
{ PopLinkWitnessV2 IDENTIFIED BY id-cmc-popLinkWitnessV2 }
id-cmc-popLinkWitnessV2 OBJECT IDENTIFIER ::= { id-cmc 34 }
PopLinkWitnessV2 ::= SEQUENCE {
keyGenAlgorithm AlgorithmIdentifier{KEY-DERIVATION,
{KeyDevAlgs}},
macAlgorithm AlgorithmIdentifier{MAC-ALGORITHM, {POPAlgs}}, witness OCTET STRING }
KeyDevAlgs KEY-DERIVATION ::= {kda-PBKDF2, ...} cmc-raIdentityWitness CMC-CONTROL ::=
Schaad Standards Track [Page 35]
RFC 6402 CMC: Updates November 2011
{ BodyPartPath IDENTIFIED BY id-cmc-raIdentityWitness }
id-cmc-raIdentityWitness OBJECT IDENTIFIER ::= {id-cmc 35}
-- -- Allow for an End-Entity to request a change in name. -- This item is added to RegControlSet in CRMF. -- at-cmc-changeSubjectName ATTRIBUTE ::=
{ TYPE ChangeSubjectName IDENTIFIED BY id-cmc-changeSubjectName }
id-cmc-changeSubjectName OBJECT IDENTIFIER ::= {id-cmc 36}
ChangeSubjectName ::= SEQUENCE {
subject Name OPTIONAL,
subjectAlt GeneralNames OPTIONAL
}
(WITH COMPONENTS {..., subject PRESENT} |
WITH COMPONENTS {..., subjectAlt PRESENT} )
-- -- Embedded response from a third party for processing --
cmc-responseBody CMC-CONTROL ::= {
BodyPartPath IDENTIFIED BY id-cmc-responseBody
}
id-cmc-responseBody OBJECT IDENTIFIER ::= {id-cmc 37}
-- -- Key purpose identifiers are in the Extended Key Usage extension --
id-kp-cmcCA OBJECT IDENTIFIER ::= { id-kp 27 } id-kp-cmcRA OBJECT IDENTIFIER ::= { id-kp 28 } id-kp-cmcArchive OBJECT IDENTIFIER ::= { id-kp 29 }
-- -- Subject Information Access identifier --
id-ad-cmc OBJECT IDENTIFIER ::= { id-ad 12 }
END Author's Address
Schaad Standards Track [Page 36]
RFC 6402 CMC: Updates November 2011
Jim Schaad Soaring Hawk Consulting
EMail: jimsch@augustcellars.com
Schaad Standards Track [Page 37]
Translate documents to 日本語, svenska, Nederlands, Deutsch, français, русский, italiano, español, Tiếng Việt, polski, português, 中文, українська, català, norsk, فارسی, suomi, Bahasa Indonesia, العربية, čeština, 한국어, Bahasa Melayu, magyar, română, српски and other languages.