[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]
This is a modified version of the Internet RFC suitable for machine-translating. Original version is available here:
RFC2248
Obsoleted by: 2788 PROPOSED STANDARD
Network Working Group N. Freed
Request for Comments: 2248 Innosoft
Obsoletes: 1565 S. Kille
Category: Standards Track ISODE Consortium
January 1998
Network Services Monitoring MIB
Status of this Memo
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright Notice
Copyright (C) The Internet Society (1998). All Rights Reserved.
1. Introduction
A networked application is a realization of some well defined service on one or more host computers that is accessible via some network, uses some network for its internal operations, or both.
There are a wide range of networked applications for which it is appropriate to provide SNMP monitoring of their network usage. This includes applications using both TCP/IP and OSI networking. This document defines a MIB which contains the elements common to the monitoring of any network service application. This information includes a table of all monitorable network service applications, a count of the associations (connections) to each application, and basic information about the parameters and status of each application-related association.
This MIB may be used on its own for any application, and for most simple applications this will suffice. This MIB is also designed to serve as a building block which can be used in conjunction with application-specific monitoring and management. Two examples of this are MIBs defining additional variables for monitoring a Message Transfer Agent (MTA) service or a Directory Service Agent (DSA) service. It is expected that further MIBs of this nature will be specified. This MIB does not attempt to provide facilities for management of the host or hosts the network service application runs on, nor does it provide facilities for monitoring applications that provide something other than a network service. Host resource and general application monitoring is handled by the Host Resources MIB at present; development of an additional application MIB is currently underway in the IETF.
Freed & Kille Standards Track [Page 1]
RFC 2248 Network Services MIB January 1998
2. Table of Contents
1 Introduction ............................................... 1
2 Table of Contents .......................................... 2
3 The SNMPv2 Network Management Framework .................... 2
3.1 Object Definitions ....................................... 3
4 Rationale for having a Network Services Monitoring MIB ..... 3
4.1 General Relationship to Other MIBs ....................... 4
4.2 Restriction of Scope ..................................... 4
4.3 Configuration Information ................................ 4
5 Application Objects ........................................ 5
6 Definitions ................................................ 5
7 Changes made since RFC 1565 ................................ 16
8 Acknowledgements ........................................... 16
9 References ................................................. 16
10 Security Considerations ................................... 17
11 Author and Chair Addresses ................................ 18
12 Full Copyright Statement .................................. 19
3. The SNMPv2 Network Management Framework
The SNMPv2 Network Management Framework consists of seven major components. They are:
o RFC 1902 [1] which defines the SMI, the mechanisms used for describing and naming objects for the purpose of management.
o RFC 1903 [2] defines textual conventions for SNMPv2.
o RFC 1904 [3] defines conformance statements for SNMPv2.
o RFC 1905 [4] defines transport mappings for SNMPv2.
o RFC 1906 [5] defines the protocol operations used for network access to managed objects.
o RFC 1907 [6] defines the Management Information Base for SNMPv2.
o RFC 1908 [7] specifies coexistance between SNMP and SNMPv2. The Framework permits new objects to be defined for the purpose of experimentation and evaluation.
Freed & Kille Standards Track [Page 2]
RFC 2248 Network Services MIB January 1998
3.1. Object Definitions
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) defined in the SMI. In particular, each object type is named by an OBJECT IDENTIFIER, an administratively assigned name. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the descriptor, to refer to the object type.
4. Rationale for having a Network Services Monitoring MIB
Much effort has been expended in developing tools to manage lower layer network facilities. However, relatively little work has been done on managing application layer entities. It is neither efficient nor reasonable to manage all aspects of application layer entities using only lower layer information. Moreover, the difficulty of managing application entities in this way increases dramatically as application entities become more complex.
This leads to a substantial need to monitor applications which provide network services, particularly distributed components such as MTAs and DSAs, by monitoring specific aspects of the application itself. Reasons to monitor such components include but are not limited to measuring load, detecting broken connectivity, isolating system failures, and locating congestion.
In order to manage network service applications effectively two requirements must be met:
(1) It must be possible to monitor a large number of components (typical for a large organization).
(2) Application monitoring must be integrated into general network management.
This specification defines simple read-only access; this is sufficient to determine up/down status and provide an indication of a broad class of operational problems.
Freed & Kille Standards Track [Page 3]
RFC 2248 Network Services MIB January 1998
4.1. General Relationship to Other MIBs
This MIB is intended to only provide facilities common to the monitoring of any network service application. It does not provide all the facilities necessary to monitor any specific application. Each specific type of network service application is expected to have a MIB of its own that makes use of these common facilities.
4.2. Restriction of Scope
The framework provided here is very minimal; there is a lot more that could be done. For example:
(1) General network service application configuration monitoring and control.
(2) Detailed examination and modification of individual entries in service-specific request queues.
(3) Probing to determine the status of a specific request (e.g. the location of a mail message with a specific message-id).
(4) Requesting that certain actions be performed (e.g. forcing an immediate connection and transfer of pending messages to some specific system).
All these capabilities are both impressive and useful. However, these capabilities would require provisions for strict security checking. These capabilities would also mandate a much more complex design, with many characteristics likely to be fairly implementation-specific. As a result such facilities are likely to be both contentious and difficult to implement.
This document religiously keeps things simple and focuses on the basic monitoring aspect of managing applications providing network services. The goal here is to provide a framework which is simple, useful, and widely implementable.
4.3. Configuration Information
This MIB attempts to provide information about the operational aspects of an application. Further information about the actual configuration of a given application may be kept in other places; the applDirectoryName or applURL may be used to point to places where such information is kept.
Freed & Kille Standards Track [Page 4]
RFC 2248 Network Services MIB January 1998
5. Application Objects
This MIB defines a set of general purpose attributes which would be appropriate for a range of applications that provide network services. Both OSI and non-OSI services can be accomodated. Additional tables defined in extensions to this MIB provide attributes specific to specific network services.
A table is defined which will have one row for each operational network service application on the system. The only static information held on the application is its name. All other static information should be obtained from various directory services. The applDirectoryName is an external key, which allows an SNMP MIB entry to be cleanly related to the X.500 Directory. In SNMP terms, the applications are grouped in a table called applTable, which is indexed by an integer key applIndex.
The type of the application will be determined by one or both of:
(1) Additional MIB variables specific to the applications.
(2) An association to the application of a specific protocol.
6. Definitions
NETWORK-SERVICES-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY, mib-2
FROM SNMPv2-SMI
DisplayString, TimeStamp, TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF;
application MODULE-IDENTITY
LAST-UPDATED "9708170000Z" ORGANIZATION "IETF Mail and Directory Management Working Group" CONTACT-INFO
" Ned Freed
Postal: Innosoft International, Inc.
1050 Lakes Drive West Covina, CA 91790 US
Tel: +1 626 919 3600 Fax: +1 626 919 3614
Freed & Kille Standards Track [Page 5]
RFC 2248 Network Services MIB January 1998
E-Mail: ned.freed@innosoft.com"
DESCRIPTION
"The MIB module describing network service applications"
REVISION "9311280000Z" DESCRIPTION
"The original version of this MIB was published in RFC 1565"
::= {mib-2 27}
-- Textual conventions
-- DistinguishedName is used to refer to objects in the -- directory.
DistinguishedName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION
"A Distinguished Name represented in accordance with
RFC 1779 [8]."
SYNTAX DisplayString
-- Uniform Resource Locators are stored in URLStrings.
URLString ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION
"A Uniform Resource Locator represented in accordance
with RFC 1738 [10]."
SYNTAX DisplayString
-- The basic applTable contains a list of the application -- entities.
applTable OBJECT-TYPE SYNTAX SEQUENCE OF ApplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION
"The table holding objects which apply to all different
kinds of applications providing network services. Each network service application capable of being monitored should have a single entry in this table."
::= {application 1}
applEntry OBJECT-TYPE
SYNTAX ApplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION
Freed & Kille Standards Track [Page 6]
RFC 2248 Network Services MIB January 1998
"An entry associated with a single network service
application."
INDEX {applIndex} ::= {applTable 1}
ApplEntry ::= SEQUENCE {
applIndex
INTEGER,
applName
DisplayString,
applDirectoryName
DistinguishedName,
applVersion
DisplayString,
applUptime
TimeStamp,
applOperStatus
INTEGER,
applLastChange
TimeStamp,
applInboundAssociations
Gauge32,
applOutboundAssociations
Gauge32,
applAccumulatedInboundAssociations
Counter32,
applAccumulatedOutboundAssociations
Counter32,
applLastInboundActivity
TimeStamp,
applLastOutboundActivity
TimeStamp,
applRejectedInboundAssociations
Counter32,
applFailedOutboundAssociations
Counter32,
applDescription
DisplayString,
applURL
URLString
}
applIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION
"An index to uniquely identify the network service
Freed & Kille Standards Track [Page 7]
RFC 2248 Network Services MIB January 1998
application. This attribute is the index used for lexicographic ordering of the table."
::= {applEntry 1}
applName OBJECT-TYPE
SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION
"The name the network service application chooses to be
known by."
::= {applEntry 2}
applDirectoryName OBJECT-TYPE
SYNTAX DistinguishedName MAX-ACCESS read-only STATUS current DESCRIPTION
"The Distinguished Name of the directory entry where
static information about this application is stored. An empty string indicates that no information about the application is available in the directory."
::= {applEntry 3}
applVersion OBJECT-TYPE
SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION
"The version of network service application software.
This field is usually defined by the vendor of the network service application software."
::= {applEntry 4}
applUptime OBJECT-TYPE
SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION
"The value of sysUpTime at the time the network service
application was last initialized. If the application was last initialized prior to the last initialization of the network management subsystem, then this object contains a zero value."
::= {applEntry 5}
Freed & Kille Standards Track [Page 8]
RFC 2248 Network Services MIB January 1998
applOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), down(2), halted(3), congested(4), restarting(5), quiescing(6) } MAX-ACCESS read-only STATUS current DESCRIPTION
"Indicates the operational status of the network service
application. 'down' indicates that the network service is not available. 'up' indicates that the network service is operational and available. 'halted' indicates that the service is operational but not available. 'congested' indicates that the service is operational but no additional inbound associations can be accomodated. 'restarting' indicates that the service is currently unavailable but is in the process of restarting and will be available soon. 'quiescing' indicates that service is currently operational but is in the process of shutting down. Additional inbound associations may be rejected by applications in the 'quiescing' state."
::= {applEntry 6}
applLastChange OBJECT-TYPE
SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION
"The value of sysUpTime at the time the network service
application entered its current operational state. If the current state was entered prior to the last initialization of the local network management subsystem, then this object contains a zero value."
::= {applEntry 7}
applInboundAssociations OBJECT-TYPE
SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION
"The number of current associations to the network service
application, where it is the responder. An inbound assocation occurs when a another application successfully connects to this one."
Freed & Kille Standards Track [Page 9]
RFC 2248 Network Services MIB January 1998
::= {applEntry 8}
applOutboundAssociations OBJECT-TYPE
SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION
"The number of current associations to the network service
application, where it is the initiator. An outbound association occurs when this application successfully connects to another one."
::= {applEntry 9}
applAccumulatedInboundAssociations OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION
"The total number of associations to the application entity
since application initialization, where it was the responder."
::= {applEntry 10}
applAccumulatedOutboundAssociations OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION
"The total number of associations to the application entity
since application initialization, where it was the initiator."
::= {applEntry 11}
applLastInboundActivity OBJECT-TYPE
SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION
"The value of sysUpTime at the time this application last
had an inbound association. If the last association occurred prior to the last initialization of the network subsystem, then this object contains a zero value."
::= {applEntry 12}
applLastOutboundActivity OBJECT-TYPE
SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION
"The value of sysUpTime at the time this application last
Freed & Kille Standards Track [Page 10]
RFC 2248 Network Services MIB January 1998
had an outbound association. If the last association occurred prior to the last initialization of the network subsystem, then this object contains a zero value."
::= {applEntry 13}
applRejectedInboundAssociations OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION
"The total number of inbound associations the application
entity has rejected, since application initialization. Rejected associations are not counted in the accumulated association totals. Note that this only counts associations the application entity has rejected itself; it does not count rejections that occur at lower layers of the network. Thus, this counter may not reflect the true number of failed inbound associations."
::= {applEntry 14}
applFailedOutboundAssociations OBJECT-TYPE
SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION
"The total number associations where the application entity
is initiator and association establishment has failed, since application initialization. Failed associations are not counted in the accumulated association totals."
::= {applEntry 15}
applDescription OBJECT-TYPE
SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION
"A text description of the application. This information
is intended to identify and briefly describe the application in a status display."
::= {applEntry 16}
applURL OBJECT-TYPE
SYNTAX URLString MAX-ACCESS read-only STATUS current DESCRIPTION
"A URL pointing to a description of the application.
This information is intended to identify and describe the application in a status display."
Freed & Kille Standards Track [Page 11]
RFC 2248 Network Services MIB January 1998
::= {applEntry 17}
-- The assocTable augments the information in the applTable -- with information about associations. Note that two levels -- of compliance are specified below, depending on whether -- association monitoring is mandated.
assocTable OBJECT-TYPE SYNTAX SEQUENCE OF AssocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION
"The table holding a set of all active application
associations."
::= {application 2}
assocEntry OBJECT-TYPE
SYNTAX AssocEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION
"An entry associated with an association for a network
service application."
INDEX {applIndex, assocIndex} ::= {assocTable 1}
AssocEntry ::= SEQUENCE {
assocIndex
INTEGER,
assocRemoteApplication
DisplayString,
assocApplicationProtocol
OBJECT IDENTIFIER,
assocApplicationType
INTEGER,
assocDuration
TimeStamp
}
assocIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION
"An index to uniquely identify each association for a network
service application. This attribute is the index that is used for lexicographic ordering of the table. Note that the table is also indexed by the applIndex."
Freed & Kille Standards Track [Page 12]
RFC 2248 Network Services MIB January 1998
::= {assocEntry 1}
assocRemoteApplication OBJECT-TYPE
SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION
"The name of the system running remote network service
application. For an IP-based application this should be either a domain name or IP address. For an OSI application it should be the string encoded distinguished name of the managed object. For X.400(1984) MTAs which do not have a Distinguished Name, the RFC 1327 [9] syntax 'mta in globalid' should be used. Note, however, that not all connections an MTA are necessarily to another MTA."
::= {assocEntry 2}
assocApplicationProtocol OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION
"An identification of the protocol being used for the
application. For an OSI Application, this will be the Application Context. For Internet applications, the IANA maintains a registry of the OIDs which correspond to well-known applications. If the application protocol is not listed in the registry, an OID value of the form {applTCPProtoID port} or {applUDProtoID port} are used for TCP-based and UDP-based protocols, respectively. In either case 'port' corresponds to the primary port number being used by the protocol."
::= {assocEntry 3}
assocApplicationType OBJECT-TYPE
SYNTAX INTEGER {
ua-initiator(1), ua-responder(2), peer-initiator(3), peer-responder(4)} MAX-ACCESS read-only STATUS current DESCRIPTION
"This indicates whether the remote application is some type of
client making use of this network service (e.g. a Mail User Agent) or a server acting as a peer. Also indicated is whether the remote end initiated an incoming connection to the network service or responded to an outgoing connection made by the local application. MTAs and messaging gateways are considered to be peers for the purposes of this variable."
Freed & Kille Standards Track [Page 13]
RFC 2248 Network Services MIB January 1998
::= {assocEntry 4}
assocDuration OBJECT-TYPE
SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION
"The value of sysUpTime at the time this association was
started. If this association started prior to the last initialization of the network subsystem, then this object contains a zero value."
::= {assocEntry 5}
-- Conformance information
applConformance OBJECT IDENTIFIER ::= {application 3}
applGroups OBJECT IDENTIFIER ::= {applConformance 1} applCompliances OBJECT IDENTIFIER ::= {applConformance 2}
-- Compliance statements
applCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION
"The compliance statement for SNMPv2 entities
which implement the Network Services Monitoring MIB for basic monitoring of network service applications."
MODULE -- this module
MANDATORY-GROUPS {applGroup}
::= {applCompliances 1}
assocCompliance MODULE-COMPLIANCE
STATUS current DESCRIPTION
"The compliance statement for SNMPv2 entities which
implement the Network Services Monitoring MIB for basic monitoring of network service applications and their associations."
MODULE -- this module
MANDATORY-GROUPS {applGroup, assocGroup}
::= {applCompliances 2}
Freed & Kille Standards Track [Page 14]
RFC 2248 Network Services MIB January 1998
-- Units of conformance
applGroup OBJECT-GROUP
OBJECTS {
applName, applVersion, applUptime, applOperStatus, applLastChange, applInboundAssociations, applOutboundAssociations, applAccumulatedInboundAssociations, applAccumulatedOutboundAssociations, applLastInboundActivity, applLastOutboundActivity, applRejectedInboundAssociations, applFailedOutboundAssociations, applDescription, applURL} STATUS current DESCRIPTION
"A collection of objects providing basic monitoring of
network service applications."
::= {applGroups 1}
assocGroup OBJECT-GROUP
OBJECTS {
assocRemoteApplication, assocApplicationProtocol, assocApplicationType, assocDuration} STATUS current DESCRIPTION
"A collection of objects providing basic monitoring of
network service applications' associations."
::= {applGroups 2}
-- OIDs of the form {applTCPProtoID port} are intended to be used -- for TCP-based protocols that don't have OIDs assigned by other -- means. {applUDPProtoID port} serves the same purpose for -- UDP-based protocols. In either case 'port' corresponds to -- the primary port number being used by the protocol. For example, -- assuming no other OID is assigned for SMTP, an OID of -- {applTCPProtoID 25} could be used, since SMTP is a TCP-based -- protocol that uses port 25 as its primary port.
applTCPProtoID OBJECT IDENTIFIER ::= {application 4} applUDPProtoID OBJECT IDENTIFIER ::= {application 5}
END
Freed & Kille Standards Track [Page 15]
RFC 2248 Network Services MIB January 1998
7. Changes made since RFC 1565
The only changes made to this document since it was issued as RFC 1565 [11] are the following:
(1) applDescription and applURL fields have been added. These fields are intended to identify and describe the application.
(2) A number of DESCRIPTION fields have been reworded, hopefully making them clearer.
(3) The new "quiescing" state has been added to applOperStatus.
(4) The prose about "dynamic single threaded processes" has been removed -- it was simply too confusing.
(5) Various RFC references have been updated to refer to more recent versions.
(6) The MIB has been renamed from APPLICATION-MIB to NETWORK- SERVICES-MIB. This was done because an application MIB is now under development within the IETF that provides very different functionality from this MIB.
8. Acknowledgements
This document is a product of the Mail and Directory Management (MADMAN) Working Group. It is based on an earlier MIB designed by S. Kille, T. Lenggenhager, D. Partain, and W. Yeong. The Electronic Mail Association's TSC committee was instrumental in providing feedback on and suggesting enhancements to RFC 1565 [11] that have led to the present document.
9. References
[1] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Structure of Management Information for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1902, January 1996.
[2] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1903, January 1996.
[3] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Conformance Statements for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1904, January 1996.
Freed & Kille Standards Track [Page 16]
RFC 2248 Network Services MIB January 1998
[4] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1905, January 1996.
[5] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1906, January 1996.
[6] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Management Information Base for Version 2 of the Simple Network Management Protocol (SNMPv2)", RFC 1907, January 1996.
[7] SNMPv2 Working Group, Case, J., McCloghrie, K., Rose, M., and
S. Waldbusser, "Coexistence between Version 1 and Version 2 of the Internet-standard Network Management Framework", RFC 1908, January 1996.
[8] Kille, S., "A String Representation of Distinguished Names", RFC
1779, March 1995.
[9] Kille, S., "Mapping between X.400(1988) / ISO 10021 and RFC
822", RFC 1327, May 1992.
[10] Berners-Lee, T., Masinter, L. and M. McCahill, Uniform Resource
Locators (URL)", RFC 1738, December 1994.
[11] Freed, N., and S. Kille, "Network Services Monitoring MIB", RFC
1565, January 1994.
10. Security Considerations
This MIB does not offer write access, and as such cannot be used to actively attack a system. However, this MIB does provide passive information about the existance, type, and configuration of applications on a given host that could potentially indicate some sort of vulnerability. Finally, the information MIB provides about network usage could be used to analyze network traffic patterns.
Freed & Kille Standards Track [Page 17]
RFC 2248 Network Services MIB January 1998
11. Author and Chair Addresses
Ned Freed Innosoft International, Inc. 1050 Lakes Drive West Covina, CA 91790 USA
Phone: +1 626 919 3600 Fax: +1 626 919 3614 EMail: ned.freed@innosoft.com
Steve Kille, MADMAN WG Chair ISODE Consortium The Dome, The Square Richmond TW9 1DT UK
Phone: +44 181 332 9091 EMail: S.Kille@isode.com
Freed & Kille Standards Track [Page 18]
RFC 2248 Network Services MIB January 1998
12. Full Copyright Statement
Copyright (C) The Internet Society (1998). All Rights Reserved.
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.
The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Freed & Kille Standards Track [Page 19]
Translate documents to 日本語, svenska, Nederlands, Deutsch, français, русский, italiano, español, Tiếng Việt, polski, português, 中文, українська, català, norsk, فارسی, suomi, Bahasa Indonesia, العربية, čeština, 한국어, Bahasa Melayu, magyar, română, српски and other languages.