[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

Tweet
This is a modified version of the Internet RFC suitable for machine-translating. Original version is available here: RFC8194

PROPOSED STANDARD
Internet Engineering Task Force (IETF)                  J. Schoenwaelder
Request for Comments: 8194                      Jacobs University Bremen
Category: Standards Track                                      V. Bajpai
ISSN: 2070-1721                           Technical University of Munich
                                                             August 2017


             
A YANG Data Model for LMAP Measurement Agents

Abstract

This document defines a data model for Large-Scale Measurement Platforms (LMAPs). The data model is defined using the YANG data modeling language.

Status of This Memo

This is an Internet Standards Track document.

This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.

Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc8194.

Copyright Notice

Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Schoenwaelder & Bajpai       Standards Track                    [Page 1]


RFC 8194                YANG Data Model for LMAP             August 2017
Table of Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 2
1.2. Tree Diagrams . . . . . . . . . . . . . . . . . . . . . . 2
2. Data Model Overview . . . . . . . . . . . . . . . . . . . . . 3
3. Relationship to the Information Model . . . . . . . . . . . . 9
4. YANG Modules . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1. LMAP Common YANG Module . . . . . . . . . . . . . . . . . 10
4.2. LMAP Control YANG Module . . . . . . . . . . . . . . . . 18
4.3. LMAP Report YANG Module . . . . . . . . . . . . . . . . . 40
5. Security Considerations . . . . . . . . . . . . . . . . . . . 45
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 47
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 48
7.1. Normative References . . . . . . . . . . . . . . . . . . 48
7.2. Informative References . . . . . . . . . . . . . . . . . 49
Appendix A. Example Parameter Extension Module . . . . . . . . . 51 Appendix B. Example Configuration . . . . . . . . . . . . . . . 53 Appendix C. Example Report . . . . . . . . . . . . . . . . . . . 56 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 59 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 59
1.  Introduction

This document defines a data model for Large-Scale Measurement Platforms (LMAPs) [RFC7594]. The data model is defined using the YANG [RFC7950] data modeling language. It is based on the LMAP Information Model [RFC8193].
1.1.  Terminology

This document uses the LMAP terminology defined in [RFC7594].

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
1.2.  Tree Diagrams

A simplified graphical representation of the data model is used in this document. The meaning of the symbols in these diagrams is as follows:

o Brackets "[" and "]" enclose list keys.
Schoenwaelder & Bajpai       Standards Track                    [Page 2]


RFC 8194                YANG Data Model for LMAP             August 2017
o Abbreviations before data node names: "rw" means configuration (read-write), "ro" means state data (read-only), and "w" means RPC input data (write-only).

o Symbols after data node names: "?" means an optional node, "!" means a presence container, and "*" denotes a list and leaf-list.

o Parentheses enclose choice and case nodes, and case nodes are also marked with a colon (":").

o Ellipsis ("...") stands for contents of subtrees that are not shown.
2.  Data Model Overview

The LMAP framework has three basic elements: Measurement Agents (MAs), Controllers, and Collectors. Measurement Agents initiate the actual measurements, which are called Measurement Tasks in the LMAP terminology. The Controller instructs one or more MAs and communicates the set of Measurement Tasks an MA should perform and when. The Collector accepts Reports from the MAs with the Results from their Measurement Tasks.

The YANG data model for LMAP has been split into three modules:

1. The module ietf-lmap-common.yang provides common definitions such as LMAP-specific data types.

2. The module ietf-lmap-control.yang defines the data structures exchanged between a Controller and Measurement Agents.

3. The module ietf-lmap-report.yang defines the data structures exchanged between Measurement Agents and Collectors.

As shown in Figure 1, a Controller, implementing ietf-lmap-common.yang and ietf-lmap-control.yang as a client, will instruct Measurement Agents, which implement ietf-lmap-common.yang and ietf-lmap-control.yang as servers. A Measurement Agent, implementing ietf-lmap-common.yang and ietf-lmap-report.yang, will send results to a Collector, which implements ietf-lmap-common.yang and ietf-lmap-report.yang as a server.
Schoenwaelder & Bajpai       Standards Track                    [Page 3]


RFC 8194                YANG Data Model for LMAP             August 2017
                                         +------------------------+
                                         | LMAP Controller        |
                                         |                        |
                                         | Client:                |
                                         | ietf-lmap-common.yang  |
                                         | ietf-lmap-control.yang |
                                         +------------------------+
     +------------------------+                      |
     | LMAP Measurement Agent |                      |
     |                        |     <- request       |
     | Server:                |<---------------------'
     | ietf-lmap-common.yang  |     response ->
     | ietf-lmap-control.yang |
     |                        |
     |                        |     request ->
     | Client:                |----------------------.
     | ietf-lmap-common.yang  |     <- response      |
     | ietf-lmap-report.yang  |                      |
     +------------------------+                      v
                                         +------------------------+
                                         | LMAP Collector         |
                                         |                        |
                                         | Server:                |
                                         | ietf-lmap-common.yang  |
                                         | ietf-lmap-report.yang  |
                                         +------------------------+

Figure 1: The LMAP Controller, Measurement Agent, and Collector and
the YANG Modules They Implement as Client or Server
Schoenwaelder & Bajpai       Standards Track                    [Page 4]


RFC 8194                YANG Data Model for LMAP             August 2017
The tree diagram below shows the structure of the control data model.

module: ietf-lmap-control
+--rw lmap
+--ro capabilities | +--ro version string | +--ro tag* lmap:tag | +--ro tasks | +--ro task* [name] | +--ro name lmap:identifier
       |        +--ro function* [uri]
       |        |  +--ro uri     inet:uri
       |        |  +--ro role*   string
       |        +--ro version?    string
| +--ro program? string +--rw agent | +--rw agent-id? yang:uuid
       |  +--rw group-id?                   string
       |  +--rw measurement-point?          string
       |  +--rw report-agent-id?            boolean
| +--rw report-group-id? boolean | +--rw report-measurement-point? boolean | +--rw controller-timeout? uint32 | +--ro last-started yang:date-and-time +--rw tasks | +--rw task* [name] | +--rw name lmap:identifier
       |     +--rw function* [uri]
       |     |  +--rw uri     inet:uri
       |     |  +--rw role*   string
       |     +--rw program?    string
       |     +--rw option* [id]
       |     |  +--rw id       lmap:identifier
       |     |  +--rw name?    string
       |     |  +--rw value?   string
       |     +--rw tag*        lmap:identifier
Schoenwaelder & Bajpai       Standards Track                    [Page 5]


RFC 8194                YANG Data Model for LMAP             August 2017
+--rw schedules | +--rw schedule* [name] | +--rw name lmap:identifier | +--rw start event-ref
       |     +--rw (stop)?
       |     |  +--:(end)
       |     |  |  +--rw end?               event-ref
       |     |  +--:(duration)
       |     |     +--rw duration?          uint32
       |     +--rw execution-mode?    enumeration
| +--rw tag* lmap:tag | +--rw suppression-tag* lmap:tag | +--ro state enumeration | +--ro storage yang:gauge64 | +--ro invocations yang:counter32 | +--ro suppressions yang:counter32 | +--ro overlaps yang:counter32 | +--ro failures yang:counter32 | +--ro last-invocation? yang:date-and-time | +--rw action* [name] | +--rw name lmap:identifier | +--rw task task-ref
       |        +--rw parameters
       |        |  +--rw (extension)?
       |        +--rw option* [id]
       |        |  +--rw id       lmap:identifier
       |        |  +--rw name?    string
       |        |  +--rw value?   string
       |        +--rw destination*              schedule-ref
       |        +--rw tag*                      lmap:tag
       |        +--rw suppression-tag*          lmap:tag
       |        +--ro state                     enumeration
| +--ro storage yang:gauge64 | +--ro invocations yang:counter32 | +--ro suppressions yang:counter32 | +--ro overlaps yang:counter32 | +--ro failures yang:counter32 | +--ro last-invocation yang:date-and-time | +--ro last-completion yang:date-and-time | +--ro last-status lmap:status-code | +--ro last-message string | +--ro last-failed-completion yang:date-and-time | +--ro last-failed-status lmap:status-code | +--ro last-failed-message string +--rw suppressions | +--rw suppression* [name]
Schoenwaelder & Bajpai       Standards Track                    [Page 6]


RFC 8194                YANG Data Model for LMAP             August 2017
       |     +--rw name            lmap:identifier
       |     +--rw start?          event-ref
       |     +--rw end?            event-ref
       |     +--rw match*          lmap:glob-pattern
       |     +--rw stop-running?   boolean
| +--ro state enumeration +--rw events
+--rw event* [name]
             +--rw name                    lmap:identifier
             +--rw random-spread?          uint32
             +--rw cycle-interval?         uint32
+--rw (event-type)?
+--:(periodic) | +--rw periodic | +--rw interval uint32 | +--rw start? yang:date-and-time | +--rw end? yang:date-and-time +--:(calendar) | +--rw calendar | +--rw month* lmap:month-or-all | +--rw day-of-month* lmap:day-of-months-or-all | +--rw day-of-week* lmap:weekday-or-all | +--rw hour* lmap:hour-or-all | +--rw minute* lmap:minute-or-all | +--rw second* lmap:second-or-all | +--rw timezone-offset? lmap:timezone-offset | +--rw start? yang:date-and-time | +--rw end? yang:date-and-time +--:(one-off) | +--rw one-off | +--rw time yang:date-and-time +--:(immediate) | +--rw immediate empty +--:(startup) | +--rw startup empty +--:(controller-lost) | +--rw controller-lost empty +--:(controller-connected)
+--rw controller-connected empty
Schoenwaelder & Bajpai       Standards Track                    [Page 7]


RFC 8194                YANG Data Model for LMAP             August 2017
The tree diagram below shows the structure of the reporting data model.

module: ietf-lmap-report
     rpcs:
       +---x report
          +---w input
             +---w date                 yang:date-and-time
             +---w agent-id?            yang:uuid
             +---w group-id?            string
             +---w measurement-point?   string
             +---w result*
                +---w schedule?       lmap:identifier
                +---w action?         lmap:identifier
                +---w task?           lmap:identifier
                +---w parameters
                |  +---w (extension)?
                +---w option* [id]
                |  +---w id       lmap:identifier
                |  +---w name?    string
                |  +---w value?   string
                +---w tag*            lmap:tag
                +---w event?          yang:date-and-time
                +---w start           yang:date-and-time
                +---w end?            yang:date-and-time
                +---w cycle-number?   lmap:cycle-number
                +---w status          lmap:status-code
                +---w conflict*
                |  +---w schedule-name?   lmap:identifier
                |  +---w action-name?     lmap:identifier
                |  +---w task-name?       lmap:identifier
                +---w table*
                   +---w function* [uri]
                   |  +---w uri     inet:uri
                   |  +---w role*   string
                   +---w column*     string
                   +---w row*
                      +---w value*   string
Schoenwaelder & Bajpai       Standards Track                    [Page 8]


RFC 8194                YANG Data Model for LMAP             August 2017
3.  Relationship to the Information Model

The LMAP Information Model [RFC8193] is divided into six aspects. They are mapped into the YANG data model as explained below:

o Preconfiguration Information: This is not modeled explicitly since bootstrapping information is outside the scope of this data model. Implementations may use some of the Configuration Information also for bootstrapping purposes.

o Configuration Information: This is modeled in the /lmap/agent subtree, the /lmap/schedules subtree, and the /lmap/tasks subtree described below. Some items have been left out because they are expected to be dealt with by the underlying protocol.

o Instruction Information: This is modeled in the /lmap/suppressions subtree, the /lmap/schedules subtree, and the /lmap/tasks subtree described below.

o Logging Information: Some of the Logging Information, in particular 'success/failure/warning messages in response to information updates from the Controller', will be handled by the protocol used to manipulate the LMAP-specific configuration. The LMAP data model defined in this document assumes that runtime Logging Information will be communicated using protocols that do not require a formal data model, e.g., the syslog protocol defined in [RFC5424].

o Capability and Status Information: Some of the Capability and Status Information is modeled in the /lmap/capability subtree. The list of supported Tasks is modeled in the /lmap/capabilities/ task list. Status Information about Schedules and Actions is included in the /lmap/schedules subtree. Information about network interfaces can be obtained from the ietf-interfaces YANG data model [RFC7223]. Information about the hardware and the firmware can be obtained from the ietf-system YANG data model [RFC7317]. A device identifier can be obtained from the ietf- hardware YANG data model [YANG-HARDWARE].

o Reporting Information: This is modeled by the report data model to be implemented by the Collector. Measurement Agents send results to the Collector by invoking an RPC on the Collector.

These six Information Model aspects use a collection of common information objects. These common information objects are represented in the YANG data model as follows:

o Schedules: Schedules are modeled in the /lmap/schedules subtree.


Schoenwaelder & Bajpai       Standards Track                    [Page 9]


RFC 8194                YANG Data Model for LMAP             August 2017


o Channels: Channels are not modeled since the NETCONF server configuration data model [NETCONF-CLIENT-SERVER] already provides a mechanism to configure NETCONF server Channels.

o Task Configurations: Configured Tasks are modeled in the /lmap/ tasks subtree.

o Event Information: Event definitions are modeled in the /lmap/ events subtree.
4.  YANG Modules

4.1.  LMAP Common YANG Module

This module imports definitions from [RFC6536], and it references [ISO-8601].

<CODE BEGINS> file "ietf-lmap-common@2017-08-08.yang" module ietf-lmap-common {

yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-lmap-common"; prefix "lmap";

import ietf-inet-types {
prefix inet;
}

organization
"IETF Large-Scale Measurement of Broadband Performance
Working Group";

contact
"WG Web: <https://datatracker.ietf.org/wg/lmap>
WG List: <mailto:lmap@ietf.org>

Editor: Juergen Schoenwaelder
<j.schoenwaelder@jacobs-university.de>

Editor: Vaibhav Bajpai
<bajpaiv@in.tum.de>";

description
"This module provides common definitions used by the data
models written for Large-Scale Measurement Platforms (LMAPs). This module defines typedefs and groupings but no schema tree elements.";



Schoenwaelder & Bajpai       Standards Track                   [Page 10]


RFC 8194                YANG Data Model for LMAP             August 2017


revision "2017-08-08" {
description
"Initial version";
reference
"RFC 8194: A YANG Data Model for LMAP Measurement Agents";
}

/* * Typedefs */

typedef identifier {
type string {
length "1..max";
} description
"A string value used to name something.";
}

typedef tag {
type string {
length "1..max";
} description
"A tag consists of at least one character.";
}

typedef glob-pattern {
type string {
length "1..max";
} description
'A glob style pattern (following POSIX.2 fnmatch() without
special treatment of file paths):

* matches a sequence of characters ? matches a single character [seq] matches any character in seq [!seq] matches any character not in seq

A backslash followed by a character matches the following character. In particular:

\* matches * \? matches ? \\ matches \ A sequence seq may be a sequence of characters (e.g., [abc] or a range of characters (e.g., [a-c]).'; }




Schoenwaelder & Bajpai       Standards Track                   [Page 11]


RFC 8194                YANG Data Model for LMAP             August 2017



typedef wildcard {
type string {
pattern '\*';
} description
"A wildcard for calendar scheduling entries.";
}

typedef cycle-number {
type string {
pattern '[0-9]{8}\.[0-9]{6}';
} description
"A cycle number represented in the format YYYYMMDD.HHMMSS
where YYYY represents the year, MM the month (1..12), DD the day of the months (01..31), HH the hour (00..23), MM the minute (00..59), and SS the second (00..59). The cycle number is using Coordinated Universal Time (UTC)."; }

typedef month {
type enumeration {
enum january {
value 1; description
"January of the Gregorian calendar.";
} enum february { value 2; description
"February of the Gregorian calendar.";
} enum march { value 3; description
"March of the Gregorian calendar.";
} enum april { value 4; description
"April of the Gregorian calendar.";
} enum may { value 5; description




Schoenwaelder & Bajpai       Standards Track                   [Page 12]


RFC 8194                YANG Data Model for LMAP             August 2017


"May of the Gregorian calendar.";
} enum june { value 6; description
"June of the Gregorian calendar.";
} enum july { value 7; description
"July of the Gregorian calendar.";
} enum august { value 8; description
"August of the Gregorian calendar.";
} enum september { value 9; description
"September of the Gregorian calendar.";
} enum october { value 10; description
"October of the Gregorian calendar.";
} enum november { value 11; description
"November of the Gregorian calendar.";
} enum december { value 12; description
"December of the Gregorian calendar.";
}
} description
"A type modeling the month in the Gregorian calendar.";
} typedef month-or-all {
Schoenwaelder & Bajpai       Standards Track                   [Page 13]


RFC 8194                YANG Data Model for LMAP             August 2017
type union {
type month; type wildcard; } description
"A month or a wildcard indicating all twelve months.";
}

typedef day-of-month { type uint8 { range "1..31"; } description
"A day of a month of the Gregorian calendar.";
}

typedef day-of-months-or-all {
type union {
type day-of-month; type wildcard; } description
"A day of a month or a wildcard indicating all days
of a month.";
}

typedef weekday {
type enumeration {
enum monday {
value 1; description
"Monday of the Gregorian calendar.";
} enum tuesday { value 2; description
"Tuesday of the Gregorian calendar.";
} enum wednesday { value 3; description
"Wednesday of the Gregorian calendar.";
} enum thursday { value 4; description
"Thursday of the Gregorian calendar.";
} enum friday { value 5; description



Schoenwaelder & Bajpai       Standards Track                   [Page 14]


RFC 8194                YANG Data Model for LMAP             August 2017


"Friday of the Gregorian calendar.";
} enum saturday { value 6; description
"Saturday of the Gregorian calendar.";
} enum sunday { value 7; description
"Sunday of the Gregorian calendar.";
}
} description
"A type modeling the weekdays in the Gregorian calendar.
The numbering follows the ISO 8601 scheme.";
reference
"ISO 8601:2004: Data elements and interchange formats --
Information interchange -- Representation of dates and times"; }

typedef weekday-or-all {
type union {
type weekday; type wildcard; } description
"A weekday or a wildcard indicating all seven weekdays.";
}

typedef hour { type uint8 { range "0..23"; } description
"An hour of a day.";
}

typedef hour-or-all {
type union {
type hour; type wildcard; } description
"An hour of a day or a wildcard indicating all hours
of a day.";


Schoenwaelder & Bajpai       Standards Track                   [Page 15]


RFC 8194                YANG Data Model for LMAP             August 2017


}

typedef minute { type uint8 { range "0..59"; } description
"A minute of an hour.";
}

typedef minute-or-all {
type union {
type minute; type wildcard; } description
"A minute of an hour or a wildcard indicating all
minutes of an hour.";
}

typedef second { type uint8 { range "0..59"; } description
"A second of a minute.";
}

typedef second-or-all {
type union {
type second; type wildcard; } description
"A second of a minute or a wildcard indicating all
seconds of a minute.";
}

typedef status-code { type int32; description
"A status code returned by the execution of a Task. Note
that the actual range is implementation dependent, but it should be portable to use values in the range 0..127 for regular exit codes. By convention, 0 indicates successful termination. Negative values may be used to indicate abnormal termination due to a signal; the absolute value may identify the signal number in this case."; } typedef timezone-offset {
Schoenwaelder & Bajpai       Standards Track                   [Page 16]


RFC 8194                YANG Data Model for LMAP             August 2017
type string {
pattern 'Z|[\+\-]\d{2}:\d{2}';
} description
"A time zone offset as it is used by the date-and-time type
defined in the ietf-yang-types module. The value Z is equivalent to +00:00. The value -00:00 indicates an unknown time-offset.";
reference
"RFC 6991: Common YANG Data Types";
}

/* * Groupings */

grouping registry-grouping {
description
"This grouping models a list of entries in a registry
that identify functions of a Task.";

list function {
key uri; description
"A list of entries in a registry identifying functions.";

leaf uri {
type inet:uri; description
"A URI identifying an entry in a registry.";
}

leaf-list role { type string; description
"A set of roles for the identified registry entry.";
}
}
}

grouping options-grouping {
description
"A list of options of a Task. Each option is a name/value
pair (where the value may be absent).";

list option {
key "id"; ordered-by user; description


Schoenwaelder & Bajpai       Standards Track                   [Page 17]


RFC 8194                YANG Data Model for LMAP             August 2017


"A list of options passed to the Task. It is a list of
key/value pairs and may be used to model options. Options may be used to identify the role of a Task or to pass a Channel name to a Task.";

leaf id {
type lmap:identifier; description
"An identifier uniquely identifying an option. This
identifier is required by YANG to uniquely identify a name/value pair, but it otherwise has no semantic value"; }

leaf name { type string; description
"The name of the option.";
}

leaf value { type string; description
"The value of the option.";
}
}
}
} <CODE ENDS>
4.2.  LMAP Control YANG Module

This module imports definitions from [RFC6536], [RFC6991], and the common LMAP module, and it references [RFC7398].

<CODE BEGINS> file "ietf-lmap-control@2017-08-08.yang" module ietf-lmap-control {

yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-lmap-control"; prefix "lmapc";

import ietf-yang-types {
prefix yang;
} import ietf-netconf-acm {


Schoenwaelder & Bajpai       Standards Track                   [Page 18]


RFC 8194                YANG Data Model for LMAP             August 2017


prefix nacm;
} import ietf-lmap-common {
prefix lmap;
}

organization
"IETF Large-Scale Measurement of Broadband Performance
Working Group";

contact
"WG Web: <https://datatracker.ietf.org/wg/lmap>
WG List: <mailto:lmap@ietf.org>

Editor: Juergen Schoenwaelder
<j.schoenwaelder@jacobs-university.de>

Editor: Vaibhav Bajpai
<bajpaiv@in.tum.de>";

description
"This module defines a data model for controlling Measurement
Agents that are part of a Large-Scale Measurement Platform (LMAP). This data model is expected to be implemented by Measurement Agents.";

revision "2017-08-08" {
description
"Initial version";
reference
"RFC 8194: A YANG Data Model for LMAP Measurement Agents";
}

/* * Typedefs */

typedef event-ref {
type leafref {
path "/lmap/events/event/name";
} description
"This type is used by data models that need to reference
a configured event source.";
}

typedef task-ref {
type leafref {


Schoenwaelder & Bajpai       Standards Track                   [Page 19]


RFC 8194                YANG Data Model for LMAP             August 2017


path "/lmap/tasks/task/name";
} description
"This type is used by data models that need to reference
a configured Task.";
}

typedef schedule-ref {
type leafref {
path "/lmap/schedules/schedule/name";
} description
"This type is used by data models that need to reference
a configured Schedule.";
}

/* * Groupings */

grouping start-end-grouping {
description
"A grouping that provides start and end times for
Event objects.";
leaf start {
type yang:date-and-time; description
"The date and time when the Event object
starts to create triggers.";
} leaf end { type yang:date-and-time; description
"The date and time when the Event object
stops to create triggers.

It is generally a good idea to always configure an end time and to refresh the end time as needed to ensure that agents that lose connectivity to their Controller do not continue executing Schedules forever.";
}
}

/* * Capability, configuration, and state data nodes */



Schoenwaelder & Bajpai       Standards Track                   [Page 20]


RFC 8194                YANG Data Model for LMAP             August 2017


container lmap {
description
"Configuration and control of a Measurement Agent.";

container capabilities {
config false; description
"Agent capabilities including a list of supported Tasks.";

leaf version {
type string; config false; mandatory true; description
"A short description of the software implementing the
Measurement Agent. This should include the version number of the Measurement Agent software."; }

leaf-list tag { type lmap:tag; config false; description
"An optional unordered set of tags that provide
additional information about the capabilities of the Measurement Agent."; }

container tasks {
description
"A list of Tasks that the Measurement Agent supports.";

list task {
key name; description
"The list of Tasks supported by the Measurement Agent.";

leaf name {
type lmap:identifier; description
"The unique name of a Task capability.";
}

uses lmap:registry-grouping;

leaf version { type string; description



Schoenwaelder & Bajpai       Standards Track                   [Page 21]


RFC 8194                YANG Data Model for LMAP             August 2017


"A short description of the software implementing
the Task. This should include the version number of the Measurement Task software."; }

leaf program { type string; description
"The (local) program to invoke in order to execute
the Task.";
}
}
}
}

/* * Agent Configuration */

container agent {
description
"Configuration of parameters affecting the whole
Measurement Agent.";

leaf agent-id {
type yang:uuid; description
"The agent-id identifies a Measurement Agent with
a very low probability of collision. In certain deployments, the agent-id may be considered sensitive, and hence this object is optional."; }

leaf group-id { type string; description
"The group-id identifies a group of Measurement
Agents. In certain deployments, the group-id may be considered less sensitive than the agent-id."; }

leaf measurement-point { type string; description
"The measurement point indicating where the
Measurement Agent is located on a path.";


Schoenwaelder & Bajpai       Standards Track                   [Page 22]


RFC 8194                YANG Data Model for LMAP             August 2017


reference
"RFC 7398: A Reference Path and Measurement Points
for Large-Scale Measurement of Broadband Performance"; }

leaf report-agent-id { type boolean; must '. != "true" or ../agent-id' {
description
"An agent-id must exist for this to be set
to true.";
} default false; description
"The 'report-agent-id' controls whether the
'agent-id' is reported to Collectors.";
}

leaf report-group-id { type boolean; must '. != "true" or ../group-id' {
description
"A group-id must exist for this to be set
to true.";
} default false; description
"The 'report-group-id' controls whether the
'group-id' is reported to Collectors.";
}

leaf report-measurement-point { type boolean; must '. != "true" or ../measurement-point' {
description
"A measurement-point must exist for this to be
set to true.";
} default false; description
"The 'report-measurement-point' controls whether
the 'measurement-point' is reported to Collectors.";
}

leaf controller-timeout { type uint32; units "seconds"; description


Schoenwaelder & Bajpai       Standards Track                   [Page 23]


RFC 8194                YANG Data Model for LMAP             August 2017


"A timer is started after each successful contact
with a Controller. When the timer reaches the controller-timeout, an event (controller-lost) is raised indicating that connectivity to the Controller has been lost."; }

leaf last-started { type yang:date-and-time; config false; mandatory true; description
"The date and time the Measurement Agent last started.";
}
}

/* * Task Configuration */

container tasks {
description
"Configuration of LMAP Tasks.";

list task {
key name; description
"The list of Tasks configured on the Measurement
Agent. Note that a configured Task MUST resolve to a Task listed in the capabilities. Attempts to execute a configured Task that is not listed in the capabilities result in a runtime execution error.";

leaf name {
type lmap:identifier; description
"The unique name of a Task.";
}

uses lmap:registry-grouping;

leaf program { type string; nacm:default-deny-write; description
Schoenwaelder & Bajpai       Standards Track                   [Page 24]


RFC 8194                YANG Data Model for LMAP             August 2017
"The (local) program to invoke in order to execute
the Task. If this leaf is not set, then the system will try to identify a suitable program based on the registry information present."; }

uses lmap:options-grouping {
description
"The list of Task-specific options.";
}

leaf-list tag { type lmap:identifier; description
"A set of Task-specific tags that are reported
together with the measurement results to a Collector. A tag can be used, for example, to carry the Measurement Cycle ID.";
}
}
}

/* * Schedule Instructions */

container schedules {
description
"Configuration of LMAP Schedules. Schedules control
which Tasks are executed by the LMAP implementation.";

list schedule {
key name; description
"Configuration of a particular Schedule.";

leaf name {
type lmap:identifier; description
"The locally unique, administratively assigned name
for this Schedule.";
}

leaf start { type event-ref; mandatory true; description



Schoenwaelder & Bajpai       Standards Track                   [Page 25]


RFC 8194                YANG Data Model for LMAP             August 2017


"The event source controlling the start of the
scheduled Actions.";
}

choice stop {
description
"This choice contains optional leafs that control the
graceful forced termination of scheduled Actions. When the end has been reached, the scheduled Actions should be forced to terminate the measurements. This may involve being active some additional time in order to properly finish the Action's activity (e.g., waiting for any messages that are still outstanding).";

leaf end {
type event-ref; description
"The event source controlling the graceful
forced termination of the scheduled Actions.";
}

leaf duration { type uint32; units "seconds"; description
"The duration controlling the graceful forced
termination of the scheduled Actions.";
}
}

leaf execution-mode {
type enumeration {
enum sequential {
value 1; description
"The Actions of the Schedule are executed
sequentially.";
} enum parallel { value 2; description
"The Actions of the Schedule are executed
concurrently.";
} enum pipelined { value 3; description



Schoenwaelder & Bajpai       Standards Track                   [Page 26]


RFC 8194                YANG Data Model for LMAP             August 2017


"The Actions of the Schedule are executed in a
pipelined mode. Output created by an Action is passed as input to the subsequent Action.";
}
} default pipelined; description
"The execution mode of this Schedule determines in
which order the Actions of the Schedule are executed.";
}

leaf-list tag { type lmap:tag; description
"A set of Schedule-specific tags that are reported
together with the measurement results to a Collector.";
}

leaf-list suppression-tag { type lmap:tag; description
"A set of Suppression tags that are used to select
Schedules to be suppressed.";
}

leaf state {
type enumeration {
enum enabled {
value 1; description
"The value 'enabled' indicates that the
Schedule is currently enabled.";
} enum disabled { value 2; description
"The value 'disabled' indicates that the
Schedule is currently disabled.";
} enum running { value 3; description
"The value 'running' indicates that the
Schedule is currently running.";
} enum suppressed { value 4; description


Schoenwaelder & Bajpai       Standards Track                   [Page 27]


RFC 8194                YANG Data Model for LMAP             August 2017


"The value 'suppressed' indicates that the
Schedule is currently suppressed.";
}
} config false; mandatory true; description
"The current state of the Schedule.";
}

leaf storage { type yang:gauge64; units "bytes"; config false; mandatory true; description
"The amount of secondary storage (e.g., allocated in a
file system) holding temporary data allocated to the Schedule in bytes. This object reports the amount of allocated physical storage and not the storage used by logical data records."; }

leaf invocations { type yang:counter32; config false; mandatory true; description
"Number of invocations of this Schedule. This counter
does not include suppressed invocations or invocations that were prevented due to an overlap with a previous invocation of this Schedule."; }

leaf suppressions { type yang:counter32; config false; mandatory true; description
"Number of suppressed executions of this Schedule.";
}

leaf overlaps { type yang:counter32; config false; mandatory true; description



Schoenwaelder & Bajpai       Standards Track                   [Page 28]


RFC 8194                YANG Data Model for LMAP             August 2017


"Number of executions prevented due to overlaps with
a previous invocation of this Schedule.";
}

leaf failures { type yang:counter32; config false; mandatory true; description
"Number of failed executions of this Schedule. A
failed execution is an execution where at least one Action failed."; }

leaf last-invocation { type yang:date-and-time; config false; description
"The date and time of the last invocation of
this Schedule.";
}

list action { key name; description
"An Action describes a Task that is invoked by the
Schedule. Multiple Actions are invoked according to the execution-mode of the Schedule.";

leaf name {
type lmap:identifier; description
"The unique identifier for this Action.";
}

leaf task { type task-ref; mandatory true; description
"The Task invoked by this Action.";
}

container parameters {
description
"This container is a placeholder for runtime
parameters defined in Task-specific data models augmenting the base LMAP control data model.";


Schoenwaelder & Bajpai       Standards Track                   [Page 29]


RFC 8194                YANG Data Model for LMAP             August 2017


choice extension {
description
"This choice is provided to augment in different
sets of parameters.";
}
}

uses lmap:options-grouping {
description
"The list of Action-specific options that are
appended to the list of Task-specific options.";
}

leaf-list destination { type schedule-ref; description
"A set of Schedules receiving the output produced
by this Action. The output is stored temporarily since the Destination Schedules will in general not be running when output is passed to them. The behavior of an Action passing data to its own Schedule is implementation specific.

Data passed to a sequential or pipelined Schedule is received by the Schedule's first Action. Data passed to a parallel Schedule is received by all Actions of the Schedule."; }

leaf-list tag { type lmap:tag; description
"A set of Action-specific tags that are reported
together with the measurement results to a Collector."; }

leaf-list suppression-tag { type lmap:tag; description
"A set of Suppression tags that are used to select
Actions to be suppressed.";
}

leaf state {
type enumeration {
enum enabled {
value 1; description


Schoenwaelder & Bajpai       Standards Track                   [Page 30]


RFC 8194                YANG Data Model for LMAP             August 2017


"The value 'enabled' indicates that the
Action is currently enabled.";
} enum disabled { value 2; description
"The value 'disabled' indicates that the
Action is currently disabled.";
} enum running { value 3; description
"The value 'running' indicates that the
Action is currently running.";
} enum suppressed { value 4; description
"The value 'suppressed' indicates that the
Action is currently suppressed.";
}
} config false; mandatory true; description
"The current state of the Action.";
}

leaf storage { type yang:gauge64; units "bytes"; config false; mandatory true; description
"The amount of secondary storage (e.g., allocated in a
file system) holding temporary data allocated to the Schedule in bytes. This object reports the amount of allocated physical storage and not the storage used by logical data records."; }

leaf invocations { type yang:counter32; config false; mandatory true; description




Schoenwaelder & Bajpai       Standards Track                   [Page 31]


RFC 8194                YANG Data Model for LMAP             August 2017


"Number of invocations of this Action. This counter
does not include suppressed invocations or invocations that were prevented due to an overlap with a previous invocation of this Action."; }

leaf suppressions { type yang:counter32; config false; mandatory true; description
"Number of suppressed executions of this Action.";
}

leaf overlaps { type yang:counter32; config false; mandatory true; description
"Number of executions prevented due to overlaps with
a previous invocation of this Action.";
}

leaf failures { type yang:counter32; config false; mandatory true; description
"Number of failed executions of this Action.";
}

leaf last-invocation { type yang:date-and-time; config false; mandatory true; description
"The date and time of the last invocation of
this Action.";
}

leaf last-completion { type yang:date-and-time; config false; mandatory true; description
"The date and time of the last completion of
this Action.";


Schoenwaelder & Bajpai       Standards Track                   [Page 32]


RFC 8194                YANG Data Model for LMAP             August 2017


}

leaf last-status { type lmap:status-code; config false; mandatory true; description
"The status code returned by the last execution of
this Action.";
}

leaf last-message { type string; config false; mandatory true; description
"The status message produced by the last execution
of this Action.";
}

leaf last-failed-completion { type yang:date-and-time; config false; mandatory true; description
"The date and time of the last failed completion
of this Action.";
}

leaf last-failed-status { type lmap:status-code; config false; mandatory true; description
"The status code returned by the last failed
execution of this Action.";
}

leaf last-failed-message { type string; config false; mandatory true; description
"The status message produced by the last failed
execution of this Action.";
}
}
}


Schoenwaelder & Bajpai       Standards Track                   [Page 33]


RFC 8194                YANG Data Model for LMAP             August 2017


}

/* * Suppression Instructions */

container suppressions {
description
"Suppression information to prevent Schedules or
certain Actions from starting.";

list suppression {
key name; description
"Configuration of a particular Suppression.";

leaf name {
type lmap:identifier; description
"The locally unique, administratively assigned name
for this Suppression.";
}

leaf start { type event-ref; description
"The event source controlling the start of the
Suppression period.";
}

leaf end { type event-ref; description
"The event source controlling the end of the
Suppression period. If not present, Suppression continues indefinitely."; }

leaf-list match { type lmap:glob-pattern; description
"A set of Suppression match patterns. The Suppression
will apply to all Schedules (and their Actions) that have a matching value in their suppression-tags and to all Actions that have a matching value in their suppression-tags."; } leaf stop-running { type boolean; default false; description



Schoenwaelder & Bajpai       Standards Track                   [Page 34]


RFC 8194                YANG Data Model for LMAP             August 2017


"If 'stop-running' is true, running Schedules and
Actions matching the Suppression will be terminated when Suppression is activated. If 'stop-running' is false, running Schedules and Actions will not be affected if Suppression is activated."; }

leaf state {
type enumeration {
enum enabled {
value 1; description
"The value 'enabled' indicates that the
Suppression is currently enabled.";
} enum disabled { value 2; description
"The value 'disabled' indicates that the
Suppression is currently disabled.";
} enum active { value 3; description
"The value 'active' indicates that the
Suppression is currently active.";
}
} config false; mandatory true; description
"The current state of the Suppression.";
}
}
}

/* * Event Instructions */

container events {
description
"Configuration of LMAP events.



Schoenwaelder & Bajpai       Standards Track                   [Page 35]


RFC 8194                YANG Data Model for LMAP             August 2017


Implementations may be forced to delay acting upon the occurrence of events in the face of local constraints. An Action triggered by an event therefore should not rely on the accuracy provided by the scheduler implementation.";

list event {
key name; description
"The list of event sources configured on the
Measurement Agent.";

leaf name {
type lmap:identifier; description
"The unique name of an event source.";
}

leaf random-spread { type uint32; units seconds; description
"This optional leaf adds a random spread to the
computation of the event's trigger time. The random spread is a uniformly distributed random number taken from the interval [0:random-spread]."; }

leaf cycle-interval { type uint32; units seconds; description
"The optional cycle-interval defines the duration
of the time interval in seconds that is used to calculate cycle numbers. No cycle number is calculated if the optional cycle-interval does not exist."; }

choice event-type {
description
"Different types of events are handled by
different branches of this choice. Note that this choice can be extended via augmentations.";

case periodic {
container periodic {



Schoenwaelder & Bajpai       Standards Track                   [Page 36]


RFC 8194                YANG Data Model for LMAP             August 2017


description
"A periodic timing object triggers periodically
according to a regular interval.";

leaf interval {
type uint32 {
range "1..max";
} units "seconds"; mandatory true; description
"The number of seconds between two triggers
generated by this periodic timing object.";
} uses start-end-grouping;
}
}

case calendar {
container calendar {
description
"A calendar timing object triggers based on the
current calendar date and time.";

leaf-list month {
type lmap:month-or-all; min-elements 1; description
"A set of months at which this calendar timing
will trigger. The wildcard means all months.";
}

leaf-list day-of-month { type lmap:day-of-months-or-all; min-elements 1; description
"A set of days of the month at which this
calendar timing will trigger. The wildcard means all days of a month."; }

leaf-list day-of-week { type lmap:weekday-or-all; min-elements 1; description
"A set of weekdays at which this calendar timing
will trigger. The wildcard means all weekdays.";
} leaf-list hour { type lmap:hour-or-all; min-elements 1; description


Schoenwaelder & Bajpai       Standards Track                   [Page 37]


RFC 8194                YANG Data Model for LMAP             August 2017


"A set of hours at which this calendar timing will
trigger. The wildcard means all hours of a day.";
}

leaf-list minute { type lmap:minute-or-all; min-elements 1; description
"A set of minutes at which this calendar timing
will trigger. The wildcard means all minutes of an hour."; }

leaf-list second { type lmap:second-or-all; min-elements 1; description
"A set of seconds at which this calendar timing
will trigger. The wildcard means all seconds of a minute."; }

leaf timezone-offset { type lmap:timezone-offset; description
"The time zone in which this calendar timing
object will be evaluated. If not present, the system's local time zone will be used."; } uses start-end-grouping;
}
}

case one-off {
container one-off {
description
"A one-off timing object triggers exactly once.";

leaf time {
type yang:date-and-time; mandatory true; description
"This one-off timing object triggers once at
the configured date and time.";


Schoenwaelder & Bajpai       Standards Track                   [Page 38]


RFC 8194                YANG Data Model for LMAP             August 2017


}
}
}

case immediate {
leaf immediate {
type empty; mandatory true; description
"This immediate Event object triggers immediately
when it is configured.";
}
}

case startup {
leaf startup {
type empty; mandatory true; description
"This startup Event object triggers whenever the
Measurement Agent (re)starts.";
}
}

case controller-lost {
leaf controller-lost {
type empty; mandatory true; description
"The controller-lost Event object triggers when
the connectivity to the Controller has been lost for at least 'controller-timeout' seconds.";
}
}

case controller-connected {
leaf controller-connected {
type empty; mandatory true; description
"The controller-connected Event object triggers
when the connectivity to the Controller has been restored after it was lost for at least 'controller-timeout' seconds.";
}
}
}



Schoenwaelder & Bajpai       Standards Track                   [Page 39]


RFC 8194                YANG Data Model for LMAP             August 2017


}
}
}
} <CODE ENDS>
4.3.  LMAP Report YANG Module

This module imports definitions from [RFC6536] and the common LMAP module.

<CODE BEGINS> file "ietf-lmap-report@2017-08-08.yang" module ietf-lmap-report {

yang-version 1.1; namespace "urn:ietf:params:xml:ns:yang:ietf-lmap-report"; prefix "lmapr";

import ietf-yang-types {
prefix yang;
} import ietf-lmap-common {
prefix lmap;
}

organization
"IETF Large-Scale Measurement of Broadband Performance
Working Group";

contact
"WG Web: <https://datatracker.ietf.org/wg/lmap>
WG List: <mailto:lmap@ietf.org>

Editor: Juergen Schoenwaelder
<j.schoenwaelder@jacobs-university.de>

Editor: Vaibhav Bajpai
<bajpaiv@in.tum.de>";

description
"This module defines a data model for reporting results from
Measurement Agents, which are part of a Large-Scale Measurement Platform (LMAP), to result data Collectors. This data model is expected to be implemented by a Collector.";

revision "2017-08-08" {
description
"Initial version";


Schoenwaelder & Bajpai       Standards Track                   [Page 40]


RFC 8194                YANG Data Model for LMAP             August 2017


reference
"RFC 8194: A YANG Data Model for LMAP Measurement Agents";
}

rpc report {
description
"The report operation is used by a Measurement Agent to
submit measurement results produced by Measurement Tasks to a Collector.";

input {

leaf date {
type yang:date-and-time; mandatory true; description
"The date and time when this result report was sent to
a Collector.";
}

leaf agent-id { type yang:uuid; description
"The agent-id of the agent from which this
report originates.";
}

leaf group-id { type string; description
"The group-id of the agent from which this
report originates.";
}

leaf measurement-point { type string; description
"The measurement-point of the agent from which this
report originates.";
}

list result {
description
"The list of Tasks for which results are reported.";

leaf schedule {
type lmap:identifier; description



Schoenwaelder & Bajpai       Standards Track                   [Page 41]


RFC 8194                YANG Data Model for LMAP             August 2017


"The name of the Schedule that produced the result.";
}

leaf action { type lmap:identifier; description
"The name of the Action in the Schedule that produced
the result.";
}

leaf task { type lmap:identifier; description
"The name of the Task that produced the result.";
}

container parameters {
description
"This container is a placeholder for runtime
parameters defined in Task-specific data models augmenting the base LMAP report data model.";

choice extension {
description
"This choice is provided to augment in different
sets of parameters.";
}
}

uses lmap:options-grouping {
description
"The list of options there were in use when the
measurement was performed. This list must include both the Task-specific options as well as the Action-specific options."; }

leaf-list tag { type lmap:tag; description
"A tag contains additional information that is passed
with the result record to the Collector. This is the joined set of tags defined for the Task object, the Schedule object, and the Action object. A tag can be used to carry the Measurement Cycle ID."; } leaf event { type yang:date-and-time; description



Schoenwaelder & Bajpai       Standards Track                   [Page 42]


RFC 8194                YANG Data Model for LMAP             August 2017


"The date and time of the event that triggered the
Schedule of the Action that produced the reported result values. The date and time does not include any added randomization."; }

leaf start { type yang:date-and-time; mandatory true; description
"The date and time when the Task producing
this result started.";
}

leaf end { type yang:date-and-time; description
"The date and time when the Task producing
this result finished.";
}

leaf cycle-number { type lmap:cycle-number; description
"The optional cycle number is the time closest to
the time reported in the event leaf that is a multiple of the cycle-interval of the event that triggered the execution of the Schedule. The value is only present if the event that triggered the execution of the Schedule has a defined cycle-interval."; }

leaf status { type lmap:status-code; mandatory true; description
"The status code returned by the execution of this
Action.";
}

list conflict {
description
"The names of Tasks overlapping with the execution
of the Task that has produced this result.";



Schoenwaelder & Bajpai       Standards Track                   [Page 43]


RFC 8194                YANG Data Model for LMAP             August 2017


leaf schedule-name {
type lmap:identifier; description
"The name of a Schedule that might have impacted
the execution of the Task that has produced this result."; }

leaf action-name { type lmap:identifier; description
"The name of an Action within the Schedule that
might have impacted the execution of the Task that has produced this result."; }

leaf task-name { type lmap:identifier; description
"The name of the Task executed by an Action within
the Schedule that might have impacted the execution of the Task that has produced this result.";
}
}

list table {
description
"A list of result tables.";

uses lmap:registry-grouping;

leaf-list column { type string; description
"An ordered list of column labels. The order is
determined by the system and must match the order of the columns in the result rows."; }

list row {
description
"The rows of a result table.";

leaf-list value {
type string; description
"The value of a cell in the result row.";
}


Schoenwaelder & Bajpai       Standards Track                   [Page 44]


RFC 8194                YANG Data Model for LMAP             August 2017


}
}
}
}
}
} <CODE ENDS>
5.  Security Considerations

The YANG module defined in this document is designed to be accessed via network management protocols such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is Transport Layer Security (TLS) [RFC5246].

The NETCONF access control model [RFC6536] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content.

There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability:

/lmap/agent This subtree configures general properties of the Measurement Agent such as its identity, measurement point, or Controller timeout. This subtree should only have write access for the system responsible for configuring the Measurement Agent.

/lmap/tasks This subtree configures the Tasks that can be
invoked by a Controller. This subtree should only have write access for the system responsible for configuring the Measurement Agent. Care must be taken to not expose Tasks to a Controller that can cause damage to the system or the network.
Schoenwaelder & Bajpai       Standards Track                   [Page 45]


RFC 8194                YANG Data Model for LMAP             August 2017
/lmap/schedules This subtree is used by a Controller to define
the Schedules and Actions that are executed when certain events occur. Unauthorized access can cause unwanted load on the device or network, or it might direct measurement traffic to targets that become victims of an attack.

/lmap/suppressions This subtree is used by a Controller to define
Suppressions that can temporarily disable the execution of Schedules or Actions. Unauthorized access can either disable measurements that should normally take place or cause measurements to take place during times when normally no measurements should take place.
   /lmap/events          This subtree is used by a Controller to define
                         events that trigger the execution of Schedules
and Actions. Unauthorized access can either disable measurements that should normally take place or cause measurements to take place during times when normally no measurements should take place or at a frequency that is higher than normally expected.

Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability:

/lmap/agent This subtree provides information about the Measurement Agent. This information may be used to select specific targets for attacks.

/lmap/capabilities This subtree provides information about the
capabilities of the Measurement Agent, including its software version number and the Tasks that it supports. This information may be used to execute targeted attacks against specific implementations.

/lmap/schedules This subtree provides information about the
Schedules and their associated Actions executed on the Measurement Agent. This information may be used to check whether attacks against the implementation are effective.



Schoenwaelder & Bajpai       Standards Track                   [Page 46]


RFC 8194                YANG Data Model for LMAP             August 2017


/lmap/suppressions This subtree provides information about the
Suppressions that can be active on the Measurement Agent. This information may be used to predict time periods where measurements take place (or do not take place).

Some of the RPC operations in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control access to these operations. These are the operations and their sensitivity/vulnerability:

/report The report operation is used to send locally collected measurement results to a remote Collector. Unauthorized access may leak measurement results, including those from passive measurements.

The data model uses a number of identifiers that are set by the Controller. Implementors may find these identifiers useful for the identification of resources, e.g., to identify objects in a file system providing temporary storage. Since the identifiers used by the YANG data model may allow characters that may be given special interpretation in a specific context, implementations must ensure that identifiers are properly mapped into safe identifiers.

The data model allows specifying options in the form of name/value pairs that are passed to programs. Implementors ought to take care that option names and values are passed literally to programs. In particular, shell expansions that may alter option names and values must not be performed.
6.  IANA Considerations

This document registers three URIs in the "IETF XML Registry" [RFC3688]. Following the format in RFC 3688, the following registrations have been made.

URI: urn:ietf:params:xml:ns:yang:ietf-lmap-common Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace.

URI: urn:ietf:params:xml:ns:yang:ietf-lmap-control Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace.

URI: urn:ietf:params:xml:ns:yang:ietf-lmap-report Registrant Contact: The IESG. XML: N/A; the requested URI is an XML namespace. This document registers three YANG modules in the "YANG Module Names" registry [RFC6020].



Schoenwaelder & Bajpai       Standards Track                   [Page 47]


RFC 8194                YANG Data Model for LMAP             August 2017



Name: ietf-lmap-common Namespace: urn:ietf:params:xml:ns:yang:ietf-lmap-common Prefix: lmap Reference: RFC 8194

Name: ietf-lmap-control Namespace: urn:ietf:params:xml:ns:yang:ietf-lmap-control Prefix: lmapc Reference: RFC 8194

Name: ietf-lmap-report Namespace: urn:ietf:params:xml:ns:yang:ietf-lmap-report Prefix: lmapr Reference: RFC 8194
7.  References

7.1.  Normative References

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <https://www.rfc-editor.org/info/rfc2119>.

[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008, <https://www.rfc-editor.org/info/rfc5246>.

[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010, <https://www.rfc-editor.org/info/rfc6020>.

[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011, <https://www.rfc-editor.org/info/rfc6241>.

[RFC6242] Wasserman, M., "Using the NETCONF Protocol over Secure
Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011, <https://www.rfc-editor.org/info/rfc6242>.
Schoenwaelder & Bajpai       Standards Track                   [Page 48]


RFC 8194                YANG Data Model for LMAP             August 2017
[RFC6536] Bierman, A. and M. Bjorklund, "Network Configuration
Protocol (NETCONF) Access Control Model", RFC 6536, DOI 10.17487/RFC6536, March 2012, <https://www.rfc-editor.org/info/rfc6536>.

[RFC6991] Schoenwaelder, J., Ed., "Common YANG Data Types",
RFC 6991, DOI 10.17487/RFC6991, July 2013, <https://www.rfc-editor.org/info/rfc6991>.

[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016, <https://www.rfc-editor.org/info/rfc7950>.

[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017, <https://www.rfc-editor.org/info/rfc8040>.

[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, <https://www.rfc-editor.org/info/rfc8174>.

[RFC8193] Burbridge, T., Eardley, P., Bagnulo, M., and J.
Schoenwaelder, "Information Model for Large-Scale Measurement Platforms (LMAPs)", DOI 10.17487/RFC8193, RFC 8193, August 2017, <http://www.rfc-editor.org/info/rfc8193>.
7.2.  Informative References

[ISO-8601]
International Organization for Standardization, "Data elements and interchange formats -- Information interchange -- Representation of dates and times", ISO Standard 8601:2004, December 2004.

[NETCONF-CLIENT-SERVER]
Watsen, K., Wu, G., and J. Schoenwaelder, "NETCONF Client and Server Models", Work in Progress, draft-ietf-netconf- netconf-client-server-04, July 2017.

[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004, <https://www.rfc-editor.org/info/rfc3688>.

[RFC5424] Gerhards, R., "The Syslog Protocol", RFC 5424,
DOI 10.17487/RFC5424, March 2009, <https://www.rfc-editor.org/info/rfc5424>.



Schoenwaelder & Bajpai       Standards Track                   [Page 49]


RFC 8194                YANG Data Model for LMAP             August 2017


[RFC7223] Bjorklund, M., "A YANG Data Model for Interface
Management", RFC 7223, DOI 10.17487/RFC7223, May 2014, <https://www.rfc-editor.org/info/rfc7223>.

[RFC7317] Bierman, A. and M. Bjorklund, "A YANG Data Model for
System Management", RFC 7317, DOI 10.17487/RFC7317, August 2014, <https://www.rfc-editor.org/info/rfc7317>.

[RFC7398] Bagnulo, M., Burbridge, T., Crawford, S., Eardley, P., and
A. Morton, "A Reference Path and Measurement Points for Large-Scale Measurement of Broadband Performance", RFC 7398, DOI 10.17487/RFC7398, February 2015, <https://www.rfc-editor.org/info/rfc7398>.

[RFC7594] Eardley, P., Morton, A., Bagnulo, M., Burbridge, T.,
Aitken, P., and A. Akhter, "A Framework for Large-Scale Measurement of Broadband Performance (LMAP)", RFC 7594, DOI 10.17487/RFC7594, September 2015, <https://www.rfc-editor.org/info/rfc7594>.

[W3C.REC-xml-20081126]
Bray, T., Paoli, J., Sperberg-McQueen, M., Maler, E., and F. Yergeau, "Extensible Markup Language (XML) 1.0 (Fifth Edition)", World Wide Web Consortium Recommendation REC- xml-20081126, November 2008, <http://www.w3.org/TR/2008/REC-xml-20081126>.

[YANG-HARDWARE]
Bierman, A., Bjorklund, M., Dong, J., and D. Romascanu, "A YANG Data Model for Hardware Management", Work in Progress, draft-ietf-netmod-entity-03, March 2017.
Schoenwaelder & Bajpai       Standards Track                   [Page 50]


RFC 8194                YANG Data Model for LMAP             August 2017
Appendix A.  Example Parameter Extension Module

Sometimes Tasks may require complicated parameters that cannot easily be fit into options, i.e., a list of name/value pairs. In such a situation, it is possible to augment the ietf-lmap-control.yang and ietf-lmap-report.yang data models with definitions for more complex parameters. The following example module demonstrates this idea using the parameters of UDP latency metrics as an example (although UDP latency metric parameters do not really need such an extension module).

module example-ietf-ippm-udp-latency {

namespace "urn:example:ietf-ippm-udp-latency"; prefix "ippm-udp-latency";

import ietf-inet-types {
prefix inet;
} import ietf-lmap-control {
prefix "lmapc";
} import ietf-lmap-report {
prefix "lmapr";
}

grouping ippm-udp-latency-parameter-grouping {
leaf src-ip {
type inet:ip-address; description
"The source IP address of the UDP measurement traffic.";
}

leaf src-port { type inet:port-number; description
"The source port number of the UDP measurement traffic.";
}

leaf dst-ip { type inet:ip-address; description
"The destination IP address of the UDP measurement traffic.";
} leaf dst-port { type inet:port-number; description
Schoenwaelder & Bajpai       Standards Track                   [Page 51]


RFC 8194                YANG Data Model for LMAP             August 2017
"The destination port number of the UDP measurement traffic.";
}

leaf poisson-lambda {
type decimal64 {
fraction-digits 4;
} units "seconds"; default 1.0000; description
"The average interval for the poisson stream with a resolution
of 0.0001 seconds (0.1 ms).";
}

leaf poisson-limit {
type decimal64 {
fraction-digits 4;
} units "seconds"; default 30.0000; description
"The upper limit on the poisson distribution with a resolution
of 0.0001 seconds (0.1 ms).";
}
}

augment "/lmapc:lmap/lmapc:schedules/lmapc:schedule/lmapc:action"
+ "/lmapc:parameters/lmapc:extension" {
description
"This augmentation adds parameters specific to IP Performance
Metrics (IPPM) and UDP latency metrics to Actions.";

case "ietf-ippm-udp-latency" {
uses ippm-udp-latency-parameter-grouping;
}
} augment "/lmapr:report/lmapr:input/lmapr:result"
Schoenwaelder & Bajpai       Standards Track                   [Page 52]


RFC 8194                YANG Data Model for LMAP             August 2017
+ "/lmapr:parameters/lmapr:extension" {
description
"This augmentation adds parameters specific to IPPM and
UDP latency metrics to reports.";

case "ietf-ippm-udp-latency" {
uses ippm-udp-latency-parameter-grouping;
}
}

}
Appendix B.  Example Configuration

The configuration below is in XML [W3C.REC-xml-20081126].

<config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<lmap xmlns="urn:ietf:params:xml:ns:yang:ietf-lmap-control">

<agent>
<agent-id>550e8400-e29b-41d4-a716-446655440000</agent-id> <report-agent-id>true</report-agent-id> </agent>

<schedules>
<!-- The Schedule S1 first updates a list of ping targets
and subsequently sends a ping to all targets. -->
<schedule>
<name>S1</name> <start>E1</start> <execution-mode>sequential</execution-mode> <action> <name>A1</name> <task>update-ping-targets</task> </action> <action> <name>A2</name> <task>ping-all-targets</task> <destination>S3</destination> </action> <suppression-tag>measurement:ping</suppression-tag> </schedule> <!-- The Schedule S2 executes two traceroutes concurrently. --> <schedule> <name>S2</name> <start>E1</start> <execution-mode>parallel</execution-mode> <action> <name>A1</name> <task>traceroute</task> <option> <id>target</id> <name>target</name> <value>2001:db8::1</value> </option> <destination>S3</destination> </action> <action> <name>A2</name> <task>traceroute</task> <option> <id>target</id> <name>target</name> <value>2001:db8::2</value> </option> <destination>S3</destination> </action> <suppression-tag>measurement:traceroute</suppression-tag> </schedule> <!-- The Schedule S3 sends measurement data to a Collector. --> <schedule> <name>S3</name> <start>E2</start> <action> <name>A1</name> <task>report</task> <option> <id>collector</id> <name>collector</name> <value>https://collector.example.com/</value>


Schoenwaelder & Bajpai       Standards Track                   [Page 53]


RFC 8194                YANG Data Model for LMAP             August 2017


</option>
</action>
</schedule>
</schedules>

<suppressions> <!-- Stop all measurements if we got orphaned. --> <suppression> <name>orphaned</name> <start>controller-lost</start> <end>controller-connected</end> <match>measurement:*</match>
</suppression>
</suppressions> <tasks> <!-- configuration of an update-ping-targets task --> <task> <name>update-ping-targets</name> <program>fping-update-targets</program> </task> <!-- configuration of a ping-all-targets task --> <task> <name>ping-all-targets</name> <program>fping</program> </task> <!-- configuration of a traceroute task --> <task> <name>traceroute</name> <program>mtr</program> <option> <id>csv</id> <name>--csv</name>



Schoenwaelder & Bajpai       Standards Track                   [Page 54]


RFC 8194                YANG Data Model for LMAP             August 2017


</option>
</task> <!-- configuration of a reporter task --> <task> <name>report</name> <program>lmap-report</program> </task>

<task> <name>ippm-udp-latency-client</name> <program>ippm-udp-latency</program> <function> <uri>urn:example:tbd</uri> <role>client</role> </function> <tag>active</tag>
</task>
</tasks>

<events>
<!-- The event E1 triggers every hour during September 2016
with a random spread of one minute. -->
<event>
<name>E1</name> <random-spread>60</random-spread> <!-- seconds --> <periodic> <interval>3600000</interval> <start>2016-09-01T00:00:00+00:00</start> <end>2016-11-01T00:00:00+00:00</end>
</periodic>


Schoenwaelder & Bajpai       Standards Track                   [Page 55]


RFC 8194                YANG Data Model for LMAP             August 2017


</event> <!-- The event E2 triggers on Mondays at 4am UTC --> <event> <name>E2</name> <calendar> <month>*</month> <day-of-week>monday</day-of-week> <day-of-month>*</day-of-month> <hour>4</hour> <minute>0</minute> <second>0</second> <timezone-offset>+00:00</timezone-offset>
</calendar>
</event> <!-- The event controller-lost triggers when we lost
connectivity with the Controller. -->
<event>
<name>controller-lost</name> <controller-lost/> </event> <!-- The event contoller-connected triggers when we established or re-established connectivity with the Controller. -->
<event>
<name>controller-connected</name> <controller-connected/>
</event>
</events>
</lmap>
</config>
Appendix C.  Example Report

The report below is in XML [W3C.REC-xml-20081126].

<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
message-id="1">
<report xmlns="urn:ietf:params:xml:ns:yang:ietf-lmap-report">
<date>2015-10-28T13:27:42+02:00</date> <agent-id>550e8400-e29b-41d4-a716-446655440000</agent-id> <result> <schedule>S1</schedule> <action>A1</action> <task>update-ping-targets</task> <start>2016-03-21T10:48:55+01:00</start> <end>2016-03-21T10:48:57+01:00</end> <status>0</status> </result> <result> <schedule>S1</schedule> <action>A2</action> <task>ping-all-targets</task> <start>2016-03-21T10:48:55+01:00</start> <end>2016-03-21T10:48:57+01:00</end> <status>0</status> <table> <column>target</column> <column>rtt</column> <row> <value>2001:db8::1</value> <value>42</value> </row> <row> <value>2001:db8::2</value> <value>24</value>


Schoenwaelder & Bajpai       Standards Track                   [Page 56]


RFC 8194                YANG Data Model for LMAP             August 2017


</row>
</table>
</result> <result> <schedule>S2</schedule> <action>A1</action> <task>traceroute</task> <option> <id>target</id> <name>target</name> <value>2001:db8::1</value> </option> <option> <id>csv</id> <name>--csv</name> </option> <start>2016-03-21T10:48:55+01:00</start> <end>2016-03-21T10:48:57+01:00</end> <status>1</status> <table> <column>hop</column> <column>ip</column> <column>rtt</column> <row> <value>1</value> <value>2001:638:709:5::1</value> <value>10.5</value> </row> <row> <value>2</value> <value>?</value> <value></value>


Schoenwaelder & Bajpai       Standards Track                   [Page 57]


RFC 8194                YANG Data Model for LMAP             August 2017


</row>
</table>
</result> <result> <schedule>S2</schedule> <action>A2</action> <task>traceroute</task> <option> <id>target</id> <name>target</name> <value>2001:db8::2</value> </option> <option> <id>csv</id> <name>--csv</name> </option> <start>2016-03-21T10:48:55+01:00</start> <end>2016-03-21T10:48:57+01:00</end> <status>1</status> <table> <column>hop</column> <column>ip</column> <column>rtt</column> <row> <value>1</value> <value>2001:638:709:5::1</value> <value>11.8</value> </row> <row> <value>2</value> <value>?</value> <value></value>
</row>
</table>
</result>
</report>
</rpc>
Schoenwaelder & Bajpai       Standards Track                   [Page 58]


RFC 8194                YANG Data Model for LMAP             August 2017
Acknowledgements

Several people contributed to this specification by reviewing early draft versions and actively participating in the LMAP Working Group (apologies to those unintentionally omitted): Marcelo Bagnulo, Martin Bjorklund, Trevor Burbridge, Timothy Carey, Alissa Cooper, Philip Eardley, Al Morton, Dan Romascanu, Andrea Soppera, Barbara Stark, and Qin Wu.

Juergen Schoenwaelder and Vaibhav Bajpai worked in part on the Leone research project, which received funding from the European Union Seventh Framework Programme [FP7/2007-2013] under grant agreement number 317647.

Juergen Schoenwaelder and Vaibhav Bajpai were partly funded by Flamingo, a Network of Excellence project (ICT-318488) supported by the European Commission under its Seventh Framework Programme.

Authors' Addresses

Juergen Schoenwaelder Jacobs University Bremen

Email: j.schoenwaelder@jacobs-university.de


Vaibhav Bajpai Technical University of Munich

Email: bajpaiv@in.tum.de





















Schoenwaelder & Bajpai Standards Track [Page 59]


Translate documents to 日本語, svenska, Nederlands, Deutsch, français, русский, italiano, español, Tiếng Việt, polski, português, 中文, українська, català, norsk, فارسی, suomi, Bahasa Indonesia, العربية, čeština, 한국어, Bahasa Melayu, magyar, română, српски and other languages.
inserted by FC2 system