[Docs] [txt|pdf]



This is a modified version of the Internet RFC suitable for machine-translating. Original version is available here: RFC11


Obsoleted by: 33

Network Working Group                                         G. Deloche
Request for Comments: 11                                            UCLA
                                                             August 1969


Implementation of the Host - Host Software Procedures in GORDO

TABLE OF CONTENTS
   Chapter                                                        Page
   -------                                                        ----

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . 1
2. HOST - HOST Procedures . . . . . . . . . . . . . . . . . . 2
2.1 Generalities . . . . . . . . . . . . . . . . . . . . 2
2.2 Connections and Links . . . . . . . . . . . . . . . . 2
2.2.1 Definitions . . . . . . . . . . . . . . . . . 2
2.2.2 Connection types . . . . . . . . . . . . . . . 3
2.3 Message Structure . . . . . . . . . . . . . . . . . . 5
2.4 User Transactions . . . . . . . . . . . . . . . . . . 6
2.4.1 List of transactions . . . . . . . . . . . . 7
2.4.2 HOST-HOST protocol and control messages . . . 8
3. Implementation in GORDO . . . . . . . . . . . . . . . . . 11
3.1 Introduction to GORDO . . . . . . . . . . . . . . . . 11
3.1.1 GORDO file system . . . . . . . . . . . . . . 11
3.1.2 GORDO process . . . . . . . . . . . . . . . . 12
3.2 Software Organization Overview . . . . . . . . . . . 12
3.3 Software Description . . . . . . . . . . . . . . . . 13
3.3.1 Data structures . . . . . . . . . . . . . . . 13
3.3.1.1 Allocation tables . . . . . . . . . . 13
3.3.1.2 Buffer pages . . . . . . . . . . . . 16
3.3.2 Programs . . . . . . . . . . . . . . . . . . . 18
3.3.2.1 Handler . . . . . . . . . . . . . . . 18
3.3.2.2 Network . . . . . . . . . . . . . . . 19
3.4 Software Procedures . . . . . . . . . . . . . . . . . 20
3.4.1 Description of some typical sequences . . . . 20

Appendix A: Flowcharts . . . . . . . . . . . . . . . . . . . 23

[[RFC Editor Note: [s] represents subscript s]]

1. INTRODUCTION

This technical note concentrates upon (1) the HOST-HOST procedures and (2) the implementation of the corresponding programs in GORDO (Operating System of the UCLA HOST). The first section is closely related to the BBN reports No. 1822 and 1763[1] and specifies the HOST functions for exchanging messages. It mostly deals with links and connections, message structure, transactions, and control messages.

Deloche [Page 1]


RFC 11          Host - Host Software Procedures in GORDO     August 1969

The second section is software oriented; it explains how the HOST functions are implemented and integrated into GORDO. It is involved with data structures, programs, buffers, interrupt processing, etc.

[1] Parts of this section are taken from or referred to those reports.


2. HOST-HOST PROCEDURES
2.1  Generalities

The basic idea is that several users, at a given HOST, should simultaneously be able to utilize the network by time-sharing its physical facilities.

This implies that within each HOST operating system, there must exist a special program that multiplexes outgoing messages from the users into the network and distributes incoming messages to the appropriate users. We will call this special program the Network program.
2.2  Links and Connections  (See figure 1)

2.2.1 Definitions

It is convenient to consider the Network as a black box - a system whose behavior is known but whose mechanisms are not - for communicating messages between remote users rather than between pairs of HOST computers.

(a) Logical connections

We define a logical connection as being a communication path linking two users at remote HOST[s].

With that concept, a user (user program) in a HOST computer can (1) establish several logical connections to any remote HOST users, and (2) send or receive messages over those connections.

Connections appear to users as full duplex.

One of the purposes of the Network program is to serve the users in establishing, identifying, and maintaining these connections.

Deloche [Page 2]


RFC 11          Host - Host Software Procedures in GORDO     August 1969
(b) Logical links

Each logical connection is made of a pair of directional links: one for transmitting, the other for receiving.

Those links, called logical links, are established by the Network programs and used by them.

Note here that users are only interested in connections and are completely unaware of links. Relationships between links and connections are carried out by the Network program.

One of the advantages to define a connection as a pair of directional links is that a HOST will have the capability to loop himself through its IMP (it opens a connection to himself). This feature can be useful for debugging purposes.

Further on through this paper we will not use any more the attribute logical when referring either to links or connections.

2.2.2 Connection types

In order to reach a high flexibility in utilizing the Network there is advantage to classify the connections.

Three types of connections are distinguished: (a) control connection, (b) primary connection, and (c) auxiliary connection.

(a) Control connection

This connection has a special status and is unique between a pair of HOST[s], e.g., if the Network includes x HOST[s], there are at most x control connections issued from one HOST.

This connection is used by remote Network programs for passing control messages back and forth. Control messages are basic to the establishment/deletion of standard connections. (See 2.4.2)

Note here that this control connection is the only connection which is not used by the HOST users.

Let us describe now the standard connections. (b) Primary connection

Deloche [Page 3]


RFC 11          Host - Host Software Procedures in GORDO     August 1969

These connections connect remote users.

A primary connection:

* Is unique between a pair of users and is the first to be
established.

* Is "teletype-like", i.e.:
- ASCII characters are transmitted; - Echoes are generated by the remote HOST; - The receiving HOST[s] scan for break characters; - The transmission rate is slow (less than 20 characters/sec).

* Is mainly used for transmitting control commands, e.g.,
for log-in into a remote HOST operating system.

(c) Auxiliary connection

These connections also connect remote users:

An auxiliary connection:

* Is opened in parallel to a primary connection and is not
unique, i.e., several auxiliary connections can be established between users.

* Is used for transmitting large volumes of data (file
oriented).

* Is used either for binary or character transmission.

[Figure 1 - Links and Connections - see PDF file]

Deloche [Page 4]


RFC 11          Host - Host Software Procedures in GORDO     August 1969
2.3  Message Structure

The HOST[s] communicate with each other via messages. A message may vary in length up to 8095 bits (See down below the structure). Larger transmission must therefore be broken up by HOST users into a sequence of such messages.

A message structure is identified on figure 2.

It includes the following:

(1) A leader (32 bits): Message type, Source/Destination HOST, link number. (See BBN report No. 1822, pp 13, 17)

(2) A marketing (32 bits when sent by the Sigma 7) for starting a message text on a word boundary. (See BBN report No. 1822, pp. 17, 19)

(3) The message text (Max: 8015 bits for the Sigma 7). It mostly consists of user's text. However, it may represent information for use by the Network programs. (Control messages, see 2.4.2)

(4) A checksum (16 bits). Its purpose is to check, at the HOST level, the right transmission of a message. (Changes in bit pattern or packet transposition; packets are defined in BBN report No. 1763, p. 13) See down below for checksum calculation.

(5) A padding for solving word length mismatch problems. (See BBN report No. 1822, p. 17, 19.). As far as software is concerned, padding is only involved at message reception for delineating message ends. (At transmission the hardware takes care of the padding.)

Remark:

Checksum calculation:

The last 16 bits of every message sent by a HOST is a checksum. This checksum is computed on the whole message including any marking, but excluding the 32 bit leader and any padding. To compute the checksum:

1. Consider the message to be padded with zeroes to a length of 8640 bits.

2. Section the 8640 bits into six 1440-bit segments, S0, S1...S5.


Deloche                                                         [Page 5]


RFC 11          Host - Host Software Procedures in GORDO     August 1969


3. Section each 1440-bit segment S into 90 16-bit elements, T0, T1...T89.

4. Define a function [(+)], which takes two 16-bit elements as inputs and outputs a 16-bit element. This function is defined by

Tm [(+)] Tn = Tm [(+)] Tn, if Tm + Tn < 2[exp 16]

Tm [(+)] Tn = Tm [(+)] Tn - 2[exp 16] + 1, if Tm + Tn >= 2[exp 16]

5. For each 1440-bit segment Si compute Ci = K(Si), where

K(S) = T0 [(+)] T1 + ..... T89

6. Computer C = C0[(+)]C1[(+)]C1[(+)]C2[(+)]C2[(+)]C2[(+)]C2....[(+)]C5

(Notice that C1[(+)]C1 is just C1 rotated left one bit)

The number C is the checksum. The reason the Ci are rotated by i bits is to detect packet transposition.

[Figure 2 - Format of a message sent by the Sigma 7 - see PDF file]
2.4  User Transactions

From what has been discussed until here, the Network appears to a user as a bunch of connections. Let us now explain how one can make use of these connections.

First, we are going to describe the set of transactions that a user should be able to access for utilizing the connection facilities.

Then, we are going to explain the role of the Network program for the execution of these transactions. This will cover a HOST-HOST protocol in which control messages are exchanged between network programs.

For explanation purposes those transactions are represented, at the user level, in the form of subroutine calls and parameters. However, this does not imply at all that the implementation will closely follow this pattern. (We are more involved here with the description than the implementation aspect, see chapter 3.) 2.4.1 List of transactions

Deloche [Page 6]


RFC 11          Host - Host Software Procedures in GORDO     August 1969

Listed below are the descriptions of subroutines that could be at user's disposal for creating/breaking connections and transmitting/receiving data over them. This set of subroutines can be considered as a kind of interface between the user level and the network program level.

(a) Open primary connection:

OPENPRIM (CONNECTID, HOSTID, BUFFADDR, [OPT]) CONNECTID: Connection identification # HOSTID: Remote HOST identification # BUFFADDR: Buffer address for incoming messages. OPT: Options such as message required after successful connection establishment, "full echo" (each message is transmitted back by the remote HOST for checking purpose), etc.

Remark: [ ] means optional

(b) Open auxiliary connection

OPENAUX (CONNECTID, BUFFADDR, N, [OPT]) CONNECTID: Connection identification #, i.e., the identification of the corresponding primary connection (First a user has to open a primary connection). BUFFADDR: Same meaning as above. N: Number of auxiliary connections that should be opened. OPT: Same meaning as above.

(c) Transmission over connection

TRANSM (CONNECTID, NO, BUFFADDR, N, [OPT]) CONNECTID: Connection identification # NO: Connection #. The primary connection is always referred to as being NO=0. An auxiliary connection number corresponds to the order in which it has been established. (The first auxiliary opened is referred to by NO=1, the second by NO=2, etc.) BUFFADDR: Buffer address of the message to be transmitted. N: Message size (byte number) OPT: Options such as data type (characters vs. binary), trace
bit, etc.

Deloche [Page 7]


RFC 11          Host - Host Software Procedures in GORDO     August 1969
(d) Close connection

CLOSE (CONNECTID, [N], [NO]) CONNECTID: Connection identification #. N: Number of connections to be closed. If omitted all connections in use by the user, included the primary link, are closed.
NO: In case of N different from zero this number indicates the
auxiliary connection # to be closed.

2.4.2 HOST-HOST protocol and control messages

The HOST-HOST protocol is carried out by the Network programs. It mainly involves the execution of the previous transactions (initiated by users) and covers a HOST-HOST dialogue.

This dialogue fulfills control procedures for opening or breaking connections and consists in exchanging control messages over the control link. A control message has a structure identical to that of a regular message; it only differs from it by the text which is for use by Network programs instead of users.

Let us insist that this control procedure is completely unrelated to transmission control procedures implemented in the IMP computers. We are here at the HOST level (Network programs), and therefore control messages, that are going to be described below, are transmitted over the IMP[s] like regular messages.

Consider now the previous transactions and describe for each of them which messages are exchanged over which links. Each case will be explained by means of trivial examples.

We suppose that a HOST(x) user wants to a remote HOST(y) program called URSA.

(a) Open a primary connection: (OPENPRIM)

The HOST (x)'s Network program, waken up (See 3.3) by a use for opening a primary connection, starts a dialogue with the HOST (y)'s Network program.

(i) HOST(x) sends the following control message:
             HOST(x)       Control link                      HOST(y)
                         -------------------->
                           ENQ PRIM 0 1 2





Deloche                                                         [Page 8]


RFC 11          Host - Host Software Procedures in GORDO     August 1969


ENQ: Enquiry for connection establishment (one ASCII
character)
PRIM: Connection type: primary (one special character) 0 1 2: Outgoing link #. It is a decimal number (3 ASCII characters), e.g., link #12.

This link # has been determined by the HOST(x) Network program (See implementation: 3.3)

(ii) HOST(y) acknowledges by sending back the following control
message:
             HOST(x)        Control link                     HOST(y)
                         <------------------------
                          ACK ENQ PRIM 0 1 2 0 1 5

ACK: Positive acknowledgment (one ASCII character) ENQ PRIM 0 1 2: Same meaning as above. This part of the
message is returned for checking purposes.
0 1 5: Incoming link #. It follows the same pattern as
the outgoing link #. This link # has been determined by the HOST(y) Network program.

Now the connection is established; it will use links #12 and 15 for exchanging user messages. The connection is said to be in a pre-log-in state, i.e., the remote HOST(y) expects its standard log-in procedures.

(b) Transmission over primary connection: (TRANSM)

By means of TRANSM subroutines referring to the primary connection, the HOST(x) user is able to sign-in into the HOST(y) operating system and then to call for the URSA program (HOST(y) user program).

The Network programs at both ends will use the link #12 and #15 for passing along messages. These messages are standard messages whose contents serve for log in sequence.

A trivial example could be:
             HOST(x)     Prim. Link #12                       HOST(y)
                         ---------------------------->
                         ! S I G N - I N : X X

Deloche [Page 9]


RFC 11          Host - Host Software Procedures in GORDO     August 1969
             HOST(x)     Prim. Link #15                       HOST(y)
                         <--------------------------
                         ! ! R E A D Y

             HOST(x)     Prim. Link #12                       HOST(y)
                         ---------------------------->
                           ! U R S A

(c) Open an auxiliary connection: (OPENAUXI)

In a very similar manner as (a) an auxiliary connection is established between HOST(x) and HOST(y). For so doing control messages are exchanged over the control link.
             HOST(x)           Control link                  HOST(y)
                         ------------------------------>
                               ENQ AUX 0 2 5

             HOST(x)           Control link                  HOST(y)
                         <--------------------------------
                             ACK ENQ AUX 0 2 5 0 2 1

Now the auxiliary connection is established, it will use links #25 and 21 for exchanging standard messages.

(d) Transmission over auxiliary connection: (TRANSM)

By means of TRANSM subroutines referring to the auxiliary connection, the users at both ends can exchange data:
             HOST(x)        Aux. Link #25                    HOST(y)
                         -------------------------------->
                               X X ..... X X

             HOST(x)         Aux. Link #21                   HOST(y)
                         <--------------------------------
                             X ......... X

etc.......

(e) Close connections: (CLOSE)

This is carried out in a similar manner as (a). The user calls a CLOSE subroutine and then the Network programs at both ends exchange control messages.

Deloche [Page 10]


RFC 11          Host - Host Software Procedures in GORDO     August 1969
             HOST(x)           Control Link                  HOST(y)
                         ----------------------------->
                               EOT 0 0 1 0 1 2

EOT: End of transmission (one ASCII character) 0 0 1 : No. of connections to be closed (3 decimal ASCII
characters)
0 1 2 : Outgoing link # to be closed.

Then HOST(y) acknowledges back as in (a).
             HOST(x)           Control Link                  HOST(y)
                         <-----------------------------
                            ACK EOT 0 0 1 0 1 2 0 1 5

Remark 1 - In (a), (c), and (e) HOST(y) may answer back a message including a negative acknowledgement character NAK instead of ACK. This for many various reasons such as: wrong sequence, connection already opened, and so forth. The message could be NAK IND, where IND is an alphanumerical character indicating, in a coded form, why the previous block has been refused. Upon receiving back such acknowledgments HOST(x) will repeat its message until HOST(y) accepts it. An emergency procedure will take place if too many successive "NAK messages" occur.

Remark 2 - On each of the above illustrations (arrows) only the message text is represented. In fact, complete messages (with leader, marking, padding...) are exchanged over these links.


3. IMPLEMENTATION IN GORDO
3.1  Introduction to GORDO

GORDO is a time-sharing system implemented on SDS Sigma 7. We outline below some of the characteristics relevant to our paper.

3.1.1 GORDO file system

The file system is page oriented. It is composed of files and directories. A file consists of a heading and a number of pages which compose the body of the file. A directory consists of a number of entries that point to either files or other directories. 3.1.2 GORDO process

Deloche [Page 11]


RFC 11          Host - Host Software Procedures in GORDO     August 1969

* A process is a program (procedures and data) plus its logical environment. In other words a process is a program which is known and controlled by the GORDO scheduler.

* A user (a job) may have several processes as different as compiler, loader, editor, application program, etc. A process is created through a system call (FORK).

* The space a process can refer to is the Virtual Space of 128k word length. A part (8k) of it is reserved for the operating system, the other part (120k) is directly accessed by the user. This later may fill or modify its part of the virtual space upon 'coupling'. (See below: service calls) pages taken from different files. Figure 3 illustrates this coupling.

* A process can request for services by means of system calls. The system calls relevant to our paper are:

WAKE for awaking (set active) a sleeping process SLEEP for putting asleep another process (or itself) COUPLE for coupling a page from the file space to the virtual
space.

* A process ordinarily runs in slave mode. However if it is set up as an I/O process it can access privileged instructions.

* Processes can share data through files attached to "mail box" directories.

Remark: Through this note the words process and program are used inter-changeably.

[Figure 3 - Virtual Space and Coupling - see PDF file]
3.2  Software Organization Overview

Figure 4 illustrates the overall organization.

The system is based upon two main programs: the "Network" and the "Handler".

The Handler is an I/O interrupt routine closely related to the IMP- HOST hardware interface. It serves the Network process in transmitting an receiving network messages.

The Network process carries out most of the work. Its main function is to satisfy the users' requests for opening/ closing connections and transmitting/receiving network messages. For so doing,


Deloche                                                        [Page 12]


RFC 11          Host - Host Software Procedures in GORDO     August 1969



* it establishes, identifies, and breaks the links upon using the allocation tables (HOST, CONNECT, INPUT LINK; see 3.3.1.1)

* it is aware of the presence of new users upon exploring the Network mail box directory;

* it communicates with active users by means of shared pages through which messages and requests are exchanged (connection shared pages);


* it formats incoming/outgoing messages in a working page. This working page has an extension (emergency ring);

* it communicates with the Handler by means of a shared page (I/O communication page) which contains the I/O communication buffers.

[Figure 4 - Software organization overview - see PDF file]
3.3  Software Description

3.3.1  Data Structures

3.3.1.1 Allocation tables: HOST, CONNECT, INPUT LINK

The Network program establishes, identifies, and breaks links and connections upon using 3 tables:

A table sorted by remote HOST #.

A table sorted by connection #.

A table sorted by input link #.

(a) HOST table (see figure 5)

It is a bit table indicating the free outgoing links. It has the following characteristics:

* Location: Disc resident

* Coupling: Coupled to the Network process virtual space.

* Size: As many slots as remote HOST[s]. * Slot structure: As many bits as possible outgoing links


Deloche                                                        [Page 13]


RFC 11          Host - Host Software Procedures in GORDO     August 1969


to a remote HOST, i.e., 256.

* Access: Indexing. Each slot is accessed through a remote
HOST #.

* Specific feature: Throughout the whole table no more
than 64 bits can be turned on. This figure corresponds to the maximum number of outgoing links that can be activated at one time (No matter what is the number of remote HOST[s]).

(b) CONNECT table

This table keeps track of all the connections' environment.

It has the following characteristics:

* Location: Disc resident

* Coupling: Couples to the Network process virtual space

* Size: As many slots as connections in use.

* Slot structure: See figure 6. Each slot is 2 word
length

* Access: Indexing. Each slot is accessed through a
connection #. See 3.4 the way it is handled.

* Specific feature 1: The slot structure corresponding to
a primary connection is not identical to that of an auxiliary connection (See figure 7). This because user identifications and requests are done through primary shared pages.

* Specific feature 2: This table is handled in parallel
with the connection pages (See 3.3.2 (b))

Deloche [Page 14]


RFC 11          Host - Host Software Procedures in GORDO     August 1969
* Specific feature 3: This table is mainly used for
transmitting messages. (For each connection it contains the outgoing link # and remote HOST #, i.e., all the information required for transmitting a message.)

(c) INPUT LINK table

This table keeps track of all the incoming (input) links and so is closely related to the CONNECT table.

[Figure 5 - HOST table - see PDF file]

[Figure 6 - CONNECT table: Slot structure - see PDF file]

[Figure 7 - INSERT LINK table: Slot structure - see PDF file]

It has the following characteristics:

* Location: Disc resident.

* Coupling: Coupled to the Network process virtual space.

* Size: As many slots as incoming links, i.e., as
connections

* Slot structure: See figure 7. Each slot is 1 word
length

* Access: Hashing. The hashed key value is mainly based
upon the incoming link # and the remote HOST #.

* Specific feature 1: This table is also used for
momentarily memorizing the connection number while establishing the next connection. See 3.4 the way it is handled.

* Specific feature 2: This table is primarily used upon
receiving messages. (For each incoming link it contains the corresponding connection #, i.e., indirectly the user identification to which the message should be passed along) 3.3.1.2 Buffer pages




Deloche                                                        [Page 15]


RFC 11          Host - Host Software Procedures in GORDO     August 1969



All the pages that are now to be described contain two buffers (input and output). These buffers are used for either passing along or processing messages.

The size of each of these buffers should at least be equal to that of a message, i.e., 8095 bits. We have chosen a buffer size of 253 words (8096 bits) so that both of the buffers are included within one page (512 words). The 6 remaining words of the page are generally used for control.

A typical buffer page structure is identified on figure 8.

(a) I/O communication page

See figure 9.

This I/O communication page is used as an interface between the Handler and the Network program.

In the buffers of this page the messages are assembled (input) or de-assembled (output) word by word by the Handler, e.g., a "ready to go" message, sorted by the Network program in the output buffer, is shipped out word by word by the Handler.

Main characteristics:

* Location: Resident in core: Locked page * Coupling: Coupled to the Network process virtual space * Content: * Input buffer (253 words) for incoming messages
Output buffer (253 words) for outgoing messages
* Input control zone (6 half words) * Output control zone (6 half words) * Structure: See figure 9. * Specific feature: * The input buffer is filled by the Handler (read from hardware) and emptied by the Network program
* Vice versa for the output buffer

(b) Connection shared pages (User-Network shared zone)

General features:

* There are as many shared pages as connections.

* These pages shared between the network and the user processes constitute a communication zone for (1) passing the messages back and forth, and (2) exchanging control information, e.g., a request for establishing new connections.


Deloche                                                        [Page 16]


RFC 11          Host - Host Software Procedures in GORDO     August 1969



Main characteristics:

* Location: Disc resident * Coupling: Coupled to both a user process virtual space and
the
network process virtual space.
* Content: - Input buffer (253 words) for incoming messages
- Output buffer (253 words) for outgoing messages - Input control zone (6 half words) - Output control zone (6 half words) * Structure: See figure 10. * Specific feature 1: - The input buffer is filled by the
Network and emptied by the user.
- Vice versa for the output buffer.
* Specific feature 2: The control zone corresponding to a
primary connection shared page differs from that of an auxiliary connection. This because it is via a "primary connection control zone" that auxiliary connection establishment requests are transmitted to the Network process.

(c) Working page

General feature:

* This page allows the Network and the Handler programs to work independently on different messages and so contributes to an overlapping. For instance, when the Handler is busy transmitting a message to the hardware, the Network program can format (leader, marking, etc.) the reset message to be shipped out, so that it can reinitiate the Handler as soon as it is free.

Main characteristics:

* Location: Disc resident * Coupling: Coupled to the Network process virtual space * Content: - Input buffer (253 words) for incoming messages
- Output buffer (253 words) for outgoing messages

Deloche [Page 17]


RFC 11          Host - Host Software Procedures in GORDO     August 1969
Remark:

During reception it may happen that a user program is not ready to accept a new message. In that case, to avoid clogging up the system, the Network stores momentarily the incoming message in one of the buffer of the emergency ring. (If this ring is full a help routine will be invoked.)

During emission all operations are synchronized with the RFNM[s], therefore such procedures need not be provided. (The Network program allows a user to re-emit only when having received the RFNM of the previous transmitted message.)

[Figure 8 - Typical buffer page - see PDF file]

[Figure 9 - I/O Communication page structure - see PDF file]

[Figure 10 - Connection shared page structure - see PDF file]
3.3.2  Programs

3.3.2.1 Handler program

General features:

It is an I/O interrupt routine which drives the IMP/HOST hardware interface in order to transmit or receive messages. Transmission and reception are carried out in a full duplex mode.

Main characteristics:

* Location: Core resident. The Handler is in the same memory zone as the operating system and can be considered as part of it.

* Initiation: By the IMP-HOST hardware interrupt. This interrupt
is triggered either:

* during transmission when a message word is completely sent to the IMP

* during reception when a message word has been completely received from the IMP

* during idle time when the hardware received either a 'start input' or 'start output' order from the Sigma 7 CPU. Those orders are issued by the Network program for provoking interrupts back (consequently for indirectly initiating the Handler).


Deloche                                                        [Page 18]


RFC 11          Host - Host Software Procedures in GORDO     August 1969



* Main functions: * Empties the output buffer upon transmitting
its content (outgoing message to the IMP. This operation is carried out word by word (32 bits) and makes use of "Write" orders for driving the HOST-IMP hardware.

* Fills the input buffer with data received from HOST-IMP hardware (incoming message). This operation is also carried out word by word and makes use of "Read" orders for driving the HOST-IMP hardware.

* Wakes up the Network program when any of the previous operations is complete.

3.3.2.2 Network program

General features:

This program serves the user for opening/closing connections and transmitting/receiving messages. It uses the Handler as an aid for inter-facing with the hardware.

For the GORDO point of view it is a regular process and treated as such.

Main characteristics:

* Location: Disc resident. More precisely it is on disc when asleep and called in core when awakened by a program.
* Initiation: It is initiated through 'WAKE' service calls
issued either by a user process or by the Handler.
* Main functions: * Establishes/deletes outgoing connections upon
users' requests. For so doing it sends control messages (see 2.4.2) to remote HOST[s] in order to get links established/released; it then notifies back the users.
* Insures the processing of incoming control
messages (transmitted over control links), e.g., for contributing to establishments/deletions of connections (those requested by remote HOSTS).



Deloche                                                        [Page 19]


RFC 11          Host - Host Software Procedures in GORDO     August 1969


* Prepares transmission of outgoing messages. It picks up text messages from shared pages (the messages are stored there by users), formats them (adds leader, marking, checksum..), and passes them along to the Handler for transmission.
* Insures delivery of incoming messages. It is
the opposite of the above operation. The users to which the messages should be delivered are identified through the leaders.

* Virtual space configuration: See figure 11.

* Specific feature: It is integrated as an I/O process, so that it can access privileged instruction (RD/WD for indirectly initiating the Handler).

[Figure 11 - Network Process Virtual Space - see PDF file]
3.4  Software Procedures

The detailed software procedures are given on the flowcharts attached with Appendix A.

However, to get a quick understanding of the implementation we list below some typical software procedures.
3.4.1  Description of some typical sequences

Consider some of the transactions at user's disposal (See 2.4) and point out the basic software procedures they imply. For each case we will delineate (i) what the user program does and (ii) what the Network program does.

(a) Open a primary link (See also 2.4.2)

(i) What the user program does[1]:

* it stores in the Network mail box directory the name of a file, e.g., DATA;
* it couples the first page of this file to its virtual
space;
* it stores information in this page (its job/process #,
the remote HOST #, e.g., (i));
* it wakes up the Network process; * it goes to sleep.




Deloche                                                        [Page 20]


RFC 11          Host - Host Software Procedures in GORDO     August 1969


(ii) What the Network program does:

* it explores the Network mail box directory and accesses the file DATA;
* it couples the first page of this file to its virtual
space (Shared Zone, see 3.3.1.2). Suppose this page to be kth in the shared zone; k is the internal connection #;
* it explores the ith slot of the new HOST table (See
3.3.1.1 (a)) and selects the first bit = 0, e.g., the (alpha)th bit; alpha corresponds to the outgoing link #;
* it stores information (job/process #, remote HOST #
(i), outgoing link # (alpha)) in the kth slot of the CONNECT table (See 3.3.1.2).
* it momentarily stores the connection # (k) in the INPUT
LINK table. This is carried out upon creating an entry in this table (Hashing the key value: "outgoing link # (alpha) + remote HOST # (i) + outgoing flag".);
* it prepares the message text ENQ PRIM 0 0 a and formats
a complete message in adding leader, marking, checksum, etc.;
* it checks the Handler state (bit in I/O locked page).
If the Handler is free, it stores the 'ready to go' control message in the output buffer of the I/O locked page, initiates the Handler, and goes to sleep. Else it goes to sleep.

After a while the Handler wakes up the Network process because it has received a complete message. We suppose this message be the control message sent by the remote HOST for acknowledging the establishment of the connection. The message text should be:

ACK ENQ PRIM 0 0 alpha 0 0 beta

where beta is the incoming link #. (See 2.4.2)

Let's see now what the Network program does when receiving the above control message:

* it retrieves the connection # previously stored in the INPUT LINK table upon re-hashing the same key value (See above). Also it deletes this entry;
* it creates an entry in the INPUT LINK table for the
incoming link. For so doing it hashes the key value: "incoming link # (beta]) + remote HOST # (i) + "incoming flag". In this entry it stores the HOST # (i), the incoming link # (beta), and connection # (k);


Deloche                                                        [Page 21]


RFC 11          Host - Host Software Procedures in GORDO     August 1969


* it updates the kth slot of the CONNECT table in storing the incoming link # (beta);
* it turns on the 'net-user' bit in the kth shared page
(page corresponding to the primary connection that has just been opened) and wakes up the user process;
* it goes to sleep.

(b) Transmit a message over primary link

(i) What the user program does[1].

* it stores the message text in the output buffer of the primary connection shared page (see 3.3.1.2);
* it turns on the 'user-net' bit of this page and wakes
up the Network process;
* it goes to sleep.

(ii) What the Network program does:

* it looks for user request, i.e., it explores in sequence the connection shared pages and selects the one that has its 'user-net' bit turned on. Suppose k be the selected page # on the shared list, K is the connection #;
* it determines the request type in testing the 'request
bits' of the shared page k. It finds out that it is a request for transmitting a message.
* it takes the message text from the output buffer of the
shared page k, formats it into a complete message and transmits to the Handler in a very similar way as above (See Open a primary link).
* it goes to sleep.

[1] Remark: In a first phase the user will directly write the
network functions in his program. Later on subroutines will be put at user's disposal. These subroutines will be very close to those described in 2.4.

Deloche [Page 22]


RFC 11          Host - Host Software Procedures in GORDO     August 1969
APPENDIX A

Flowcharts

[see PDF file for flowcharts]

[ This RFC was put into machine readable form for entry ]
[ into the online RFC archives by Bob German 8/99 ]











































Deloche [Page 23]


    Html markup produced by rfcmarkup 1.121, available from
https://tools.ietf.org/tools/rfcmarkup/

inserted by FC2 system